Panasonic AJ-SPD850P manual User menu Edit

Setup menus (continued)

USER menu <EDIT>

No./Item		Description
303	This selects STD or NON-STD in
	accordance with the composite input
STD/NON-STD	signal.
	0000	AUTO :
	Standard/non-standard signals are
	automatically identified and
	processed.
	0001	STD :
	Standard signals are processed.
	(Forced STD)
	0002 N-STD :
	Non-standard signals are processed.
	(Forced NON-STD)
	Notes:
	• Use the non-standard (NON-STD)
	setting when video or audio trouble
	occurs with signals from laser discs or a
	satellite.
	• At the NON-STD setting, the images
	shown on the front panel's LCD monitor
	will be significantly disrupted when the
	unit's operation is transferred from the
	play mode to EE mode: this is normal
	and not indicative of malfunctioning.
304	This selects the REF LOCK mode.
REF LOCK	0000	AUTO :
	Servo is synchronized with the input
	signal during recording, or with the
	REF signal during playback.
	0001	EXT :
	Servo is synchronized at all times with
	the REF signal.
	0002	AUTO1 :
	Servo is synchronized with the input
	signal during recording, or with the
	REF signal during playback.
	When there is no reference (REF)
	signal, the EE output is synchronized
	with the internal reference signal at
	the AUTO setting or with the STD
	input signal at the AUTO1 setting.
	The AUTO1 setting is selected when
	the STD signal is to be used.
	Note:
	At the AUTO setting, the images shown
	on the front panel's LCD monitor will be
	significantly disrupted when the unit's
	operation is transferred from the play
	mode to EE mode: this is normal and not
	indicative of malfunctioning.

The underlined items indicates the initial setting.

No./Item		Description
315	This selects the mode after cue-up
	operation is complete.
AFTER
CUE-UP	0000	STOP : STOP mode
	0001	STILL : SHTL STILL mode
320	This sets the maximum SLOW FWD
	speed.
VAR FWD MAX
	0000	+4 : +4x speed
	0001	+2 : +2x speed
	0002	+1 : +1x speed
	Note:
	At any speed setting other than 0 (+4),
	the phase cannot be synchronized from
	the editing controller.
321	This sets the maximum SLOW REV
	speed.
VAR REV MAX
	0000	–4 :–4x speed
	0001	–2 :–2x speed
	0002	–1 :–1x speed
323	This sets the maximum JOG FWD
	speed.
JOG FWD MAX
	0000	+4 : +4x speed
	0001	+2 : +2x speed
	0002	+1 : +1x speed
	Notes:
	• The maximum speed is set to +1 x
	when the dial on the front panel is
	operated.
	• At any speed setting other than 0 (+4),
	the phase cannot be synchronized from
	an editing controller which synchronizes
	the phase using the JOG command.
324	This sets the maximum JOG REV
	speed.
JOG REV MAX
	0000	–4 :–4x speed
	0001	–2 :–2x speed
	0002	–1 :–1x speed
	Note:
	The maximum speed is set to –1 x when
	the dial on the front panel is operated.

51