Panasonic AJ-SPD850P manual User menu Video

Setup menus (continued)

USER menu <TIME CODE>

No./Item		Description
510	This is used to switch the phase of
	the time code, which is output from
TC OUT REF	the TIME CODE OUT connector, for
	the external LTC input when the TCG
	switch is at the “EXT” position.
	0000	V OUT :
	Time code is synchronized with output
	video signal.
	0001 TC_IN :
	Time code is synchronized with
	external time code input.
511	This selects how the VITC which is to
	be superimposed onto the output
VITC OUT	video signal during playback is to be
	output.
	0000	SBC :
	The time code recorded in the sub
	code area is output as the VITC.
	0001	VAUX :
	The time code recorded in the VAUX
	area is output as the VITC.
514	This selects whether or not to record
	the internal time code generator value
VITC GEN	in the VAUX area.
	0000	OFF :
	The internal time code generator
	value is not recorded in the VAUX
	area.
	When video signals on which the time
	code has been recorded are input, the
	time code of the input signals is
	recorded in the VAUX area.
	0001	ON :
	The internal time code generator
	value is recorded in the VAUX area.
	Note:
	If 1394 has been selected as the input
	signals, the time code on the input
	compressed signals will be recorded
	regardless of this menu’s setting.

Sub code area:

This area is separate from the video and audio data area on the P2 card. The time code complying with SMPTE/EBU standards is stored here.

VAUX area:

This area is to be found in the video data area on the P2 card. The additional information relating to the video data is stored here.

The underlined items indicates the initial setting.

USER menu <VIDEO>

No./Item		Description
600	This selects the internal signal.
INT SG	0001	BB :
	The black burst is generated.
	0002	CB100 :
	100% color bars are generated.
	0003	CB75 :
	75% color bars are generated.
601	This selects whether to float the
	vertical sync position of the video
OUT VSYNC	output in order to align the video
	output phase with the input in the
	EE/record/edit modes.
	0000	N-VF :Signals are not floated.
	0001	VF : Signals are floated.
603	This selects ON or OFF for the closed
	caption signal of the first field.
CC (F1)
BLANK	0000	BLANK :
	Signal is forcibly blanked.
	0001	THRU : Signal is not blanked.
	Note:
	This menu option is not displayed in the
	625i system.
604	This selects ON or OFF for the closed
	caption signal of the second field.
CC (F2)
BLANK	0000	BLANK :
	Signal is forcibly blanked.
	0001	THRU : Signal is not blanked.
	Note:
	This menu option is not displayed in the
	625i system.
605	This selects the freeze mode for still
	pictures.
FREEZE SEL
	0000	FIELD : Field freeze.
	0001	FRAME : Frame freeze.
	Notes:
	• When frame freeze has been selected,
	the frame slow status is established
	with the slow setting.
	• This setting is also followed when there
	is a freeze command from the RS-422A
	connector, but the picture displayed on
	the LCD monitor screen shown at this
	time will not be frozen.
606	This selects chroma color killer
	processing for the video output
OUT C KILL	signals.
	0000	B/W :
	No color signals are output.
	0001	COLOR :
	Color signals are output.

53