Panasonic AJ-SPD850P Edh, PB/PR in LV, YC SEP Mode, Pb/Pr Out Lv, Interpolate, ESR Mode, CCR Mode

Setup menus (continued)

USER menu <VIDEO>

No./Item			Description
609	This selects whether to superimpose
	EDH onto the SDI output signals.
EDH
	0000 OFF : EDH is not superimposed.
	0001 ON : EDH is superimposed.
	Note:
	Even when ON is selected for this
	setting, EDH is not superimposed onto
	the signals output from the SDI OUT 3
	connector (optional) if the SUPER switch
	on the front panel is set to ON.
610	This selects the analog component
	input level.
PB/PR IN LV
	0000		M II : M II level
	0001	B-CAM :ß-CAM level
	Note:
	This menu option is not displayed in the
	625i system.
611	This	selects		Y/C	separation
	processing for the composite input
YC SEP MODE	signals.
	0000	B/W :
	The signals are processed as B/W
	signals.
	0001 AUTO :
	The		signals	are	automatically
	detected.
614	This selects the analog component
	output level.
PB/PR OUT LV
	0000		M II : M II level
	0001	B-CAM :ß-CAM level
	Note:
	This menu option is not displayed in the
	625i system.
618	This	selects		the	interpolation
	operation.
INTERPOLATE	Vertical		interpolation		is conducted
	automatically during slow-motion
	playback to reduce the vertical
	movement of the playback pictures.
	However, this menu item enables the
	interpolation operation to be forcibly
	turned off.
	0000	OFF :
	Interpolation is forcibly turned off.
	0001 AUTO :
	Interpolation is automatically turned
	on during slow-motion playback.

The underlined items indicates the initial setting.

No./Item		Description
620	This selects the operation mode for
	edge subcarrier reduction (ESR) in
ESR MODE	the playback circuit.
	0000	OFF :
	The mode is forcibly set to OFF.
	0001 AUTO :
	The mode is automatically set to ON
	or OFF depending on the memory
	card recorder operation.
621	This	selects the cross color
	processing during playback.
CCR MODE	0000	OFF :
	The cross color is output with no
	changes made.
	0001	ON :
	The cross color can be reduced.
	Note:
	This menu option is not displayed in the
	625i system.
624	This selects whether to record the
	closed caption signals multiplexed on
CC REC	the input signals on the card.
	0000	OFF :
	No closed caption signal is recorded.
	In addition, the EE output signals are
	blanked.
	0001	ON :
	When a closed caption signal is
	detected from the selected input
	signal, it can be recorded on the card.
	Notes:
	• This menu option is not displayed in the
	625i system.
	• If 1394 has been selected as the input
	signals, the closed caption signal on the
	input compressed signals will be
	recorded regardless of this menu’s
	setting.
645	This selects whether to record the
	WIDE information on the card.
WIDE SELECT
	0001	WIDE :
	The information is recorded.
	0002	NORMAL :
	No information is recorded.
	Note:
	If 1394 has been selected as the input
	signals, the input information will be
	recorded.

54