Panasonic AJ-SPD850P manual REC LINE3, REC LINE4, Teletext SEL

Setup menus (continued)

USER menu <V BLANK>

No./Item		Description
801	This selects the mode for recording
	signals on additional lines.
ADD LINE 50
	0000	OFF :
	No signals are recorded on additional lines.
	0001	YC422 :
	The 422 mode signals are recorded
	on 2 lines.
	0002	Y4_B/W :
	Only the Y signal is recorded on 4
	lines directly.
	0003	Y4_BPF :
	Only the Y signal is recorded on 4
	lines after it has been separated from
	the C signal.
	0004	C4 :
	Only the C signal is recorded on 4 lines.
	Notes:
	• When a setting from “0001 (YC422)” to
	“0004 (C4)” is selected and the STOP
	button is pressed, operation transfers to
	the sub-screen, and the recording lines
	can be selected.
	To return from the sub-screen, press
	the STOP button again.
	• The setting takes effect when the
	system format is 50 Mbps.
Sub-screen
00	This selects the additional line where
	the signals are to be recorded.
REC LINE1	[525i system]		[625i system]
	0000	10L	0000	7L
	:	:	:	:
	0002	12L	0002	9L
	:	:	:	:
	0012	22L	0015	22L
	0013	263L	0016	320L
	0014	273L	:	:
	:	:	0031	335L
	0025	284L	0032	623L
	0026	525L
01	This selects the additional line where
	the signals are to be recorded.
REC LINE2	[525i system]		[625i system]
	0000	10L	0000	7L
	:	:	:	:
	0012	22L	0015	22L
	0013	263L	0016	320L
	0014	273L	:	:
	:	:	0018	322L
	0016	275L	:	:
	:	:	0031	335L
	0025	284L	0032	623L
	0026	525L

The underlined items indicates the initial setting.

No./Item		Description
02	This selects the additional line where
	the signals are to be recorded.
REC LINE3	[525i system]		[625i system]
	0000	10L	0000	7L
	:	:	:	:
	0003	13L	0003	10L
	:	:	:	:
	0012	22L	0015	22L
	0013	263L	0016	320L
	:	:	:	:
	0025	284L	0032	623L
	0026	525L
	Note:
	This menu option is not displayed when
	setting “1” has been selected as the
	additional line mode.
03	This selects the additional line where
	the signals are to be recorded.
REC LINE4
	[525i system]		[625i system]
	0000	10L	0000	7L
	:	:	:	:
	0012	22L	0015	22L
	0013	263L	:	:
	:	:	0019	323L
	0017	276L	:	:
	:	:	0031	335L
	0025	284L	0032	623L
	0026	525L
	Note:
	This menu option is not displayed when
	setting “1” has been selected as the
	additional line mode.
802	This selects the type of teletext
	signals to be recorded.
TELETEXT
SEL	0000	MOJI : MOJI system
(For AJ-SPD850P)	0001	NABTS : NABTS system
	Notes:
	• This menu option is not displayed in the
	625i system.
	• VITC signals are often mistakenly
	detected as teletext signals when the
	NABTS system has been selected. If
	this happens, select MANU as the
	setting for setup menu No. 803
	(TELETEXT DET), then select the line
	for teletext signals.

59