Panasonic BT-LH2550 manual Function

Main Menu (continued)

FUNCTION

			Underlined values indicate factory defaults.
Sub menu	Settings	Description
FUNCTION 1 -	HV DELAY	Selects functions to be assigned to [FUNCTION1] - [FUNCTION5]
FUNCTION 5	AUTOSETUP	(front panel buttons).
		<HV DELAY>
	BLUE ONLY
		Displays synchronizing signals (horizontal, vertical).
	GAMMA SELECT
		The display changes in the following order.
	COLOR SPACE
		DELAY OFF H DELAY		V DELAY	HV DELAY DELAY OFF
	SD ASPECT
		<AUTOSETUP>
	SCAN
		Performs auto setup for PC display.
	TWO WINDOW	<BLUE ONLY>
	SUB INPUT SEL.	Cuts the red and green signals. Use this function to check phase and
	WFM/VECTOR	chroma. This button toggles between ON and OFF.
	MARKER	<GAMMA SELECT>*1
		Displays the gamma curve.
	LEVEL METER
		The display changes in the following order.
	CROSS HATCH
		GAMMA STANDARD GAMMA FILM			GAMMA STDIO/PST
	MONO
		GAMMA STANDARD
	TIME CODE
		<COLOR SPACE>
	CLOSED
		Sets the color space. The display changes in the following order.
	CAPTION	EBU ITU-709	WIDE1	WIDE2	WIDE3	SMPTE-C EBU
	ANAMO	<SD ASPECT>
	UNDEF	Switches between “16:9” and “4:3.”*1
		<SCAN>
		Switches between “UNDER SCAN” and “NORMAL SCAN”.*1
		<TWO WINDOW>
		Sets the split-screen function.*1
		The display changes in the following order.
	(Factory default:	• When the input signal terminals of video displayed in the sub-window
		and main window differ
	FUNCTION1:	SINGLE MAIN	TWO (L/S, M/M, S/L)		SINGLE SUB SINGLE
	MARKER	MAIN
	FUNCTION2:	• When video from the same input signal terminal is displayed in the
	WFM/VECTOR	sub-window and main window
		SINGLE MAIN	TWO(L/S, M/M, S/L)		STILL	SINGLE SUB
	FUNCTION3:
		SINGLE MAIN
	TWO WINDOW
		<SUB INPUT SEL.>
	FUNCTION4:
		Switches sub-window inputs in split screen mode.
	TIME CODE
		<WFM/VECTOR>
	FUNCTION5:
		Displays waveform or vector display.
	LEVEL METER)	<MARKER>
		Turns the marker on and off.
		<LEVEL METER>
		Turns the LEVEL METER display On and Off.
		<TIME CODE>
		Turns the time code display on and off.
		<MONO>
		Switches between color and monochrome.
		<CLOSED CAPTION>
		Turns the closed caption display on and off.
		<ANAMO>
		Turns ANAMO On and Off.
		<UNDEF>
		Undefined
FUNCTION	OFF	Selects display of functions assigned to [FUNCTION1] -
DISPLAY	ON1	[FUNCTION5] (front panel buttons). It also selects button action (1-
		touch, 2-touch, off).
	ON2
		<ON1>
		1-touch action to display and perform functions.
		<ON2>
		2-touch action to display and perform functions.
		<OFF>
		No function display.

*1 Changes in settings change menu settings.

32