Panasonic BT-LH2550 manual Input Select

Main Menu (continued)

INPUT SELECT

			Underlined values indicate factory defaults.
Sub menu	Settings	Description
VIDEO	OFF	Turns VIDEO line to the INPUT button on/off. *1
	ON
FORMAT	AUTO	Selects the video input format.*2
	NTSC	<AUTO> Automatically selects NTSC or PAL.
	PAL	<NTSC> NTSC	<PAL> PAL
NTSC SETUP	75	Selects NTSC setup level.
	00	<75>	Select this function when using 7.5% setup signals.
			(Adjusts the interior of the monitor to the 7.5% setup
			level to suit the black level)
		<00>	Select this when there is no setup signal.
SDI1	OFF	Turns SDI1 line to the INPUT button on/off. *1
	ON
SDI2	OFF	Turns SDI2 line to the INPUT button on/off. *1
	ON
YPBPR/RGB	OFF	Turns YPBPR/RGB line to the INPUT button on/off. *1
	ON
MODE	YPBPR	Selects YPBPR (component) or RGB input mode.
	RGB-VIDEO	<YPBPR>	Selects the YPBPR signal.
	RGB-COMP.	<RGB-VIDEO>	Selects the video RGB signal.
		<RGB-COMP.> Selects the PC RGB signal.
COMPONENT	SMPTE	Selects YPBPR (component) signal input level.
LEVEL	B75	<SMPTE>	Signal level complies with SMPTE and PB and PR are
	B00		0.7 Vp-p at 100% chroma.
		<B75>	Select this when connecting a Betacam or similar
			device with a setup function. (Adjusts the interior of
			the monitor to the 7.5% setup level to suit the black
			level)
		<B00>	Select this when connecting a Betacam or similar
			device without a setup function.
SELECT SYNC	INT	Selects the sync signal when using YPBPR and RGB-VIDEO input.
	EXT	<INT>	Select when the synchronizing signal is
			superimposed on the G or Y signal.
		<EXT>	Select to synchronize with an external synchronizing
			signal.
COMP.		Performs analog PC settings. (“COMP.” page 37)
DVI-D	OFF	Turns DVI-D line to the INPUT button on/off. *1
	ON
MODE	DVI-VIDEO	Selects DVI-D input mode.
	DVI-COMP.	<DVI-VIDEO>	Selects the RGB signal input of RGB video.
		<DVI-COMP.>	Selects PC input.

*1 All five input lines (VIDEO, SDI1, SDI2, YPBPR/RGB, DVI-D) cannot be turned off. An attempt to turn off all inputs ends when the fourth input line is turned off since it will not be possible to turn off the 5th input line also.

*2 “AUTO” is the factory default, but select a specific format when there is risk that the input signal may be contaminated by outside noise.

36