Panasonic BT-LH2550 manual AUTOSETUP*1, Phase, Wxga/Xga, Format Clock

Main Menu (continued)

■COMP.

Set “RGB-COMP” under “YPBPR/RGB” in the “INPUT SELECT” menu and select the “RGB-COMP” input line to enable the “COMP” menu.

		Underlined values indicate factory defaults.
Sub menu	Settings	Description
AUTOSETUP*1		Automatically adjusts RGB-COMP as well as H POSITION,
		V POSITION, PHASE and CLOCK settings of input
		formats. Selecting this submenu opens a confirmation
		screen and setup starts after choosing "YES" in this
		screen.
H POSITION	0 - 30 - 60	Adjusts horizontal image display position.*2
V POSITION	0 - 30 - 60	Adjusts vertical image display position.*2
PHASE	0 - 16 - 60	Adjusts the clock phase in 1/32 clock period increments.*2
CLOCK	700 - 2200	Adjusts the sampling clock in dot units.*2
	(Factory preset settings:*3)
WXGA/XGA	XGA	Switches between XGA (UXGA) and WXGA (WUXGA).
	WXGA
RESET		Returns “H POSITION”, “V POSITION”, “PHASE” and
		“CLOCK” settings in the RGB COMP. input compliant
		format to their factory defaults.

*1 Run “AUTOSETUP” when video is displayed across the entire screen area. “EXECUTING” is displayed during “AUTOSETUP” and “COMPLETE” appears when setup completes.

“INCOMPLETE” is displayed if setup could not be completed.

AUTOSETUP may not provide adequate adjustment for some video input. Use H POSITION, V POSITION, PHASE and CLOCK to adjust.

*2 Each input format can be adjusted but not when user data is loaded (“SETUP LOAD” page 29) or saved (“SETUP SAVE” page 29).

*3 “CLOCK” factory default

FORMAT	CLOCK		FORMAT		CLOCK
640 × 400 (70 Hz)	800	1024	× 768 (70 Hz)		1328
640 × 480 (60 Hz)	800	1024	× 768 (75 Hz)		1312
640 × 480 (75 Hz)	840	1024	× 768 (85 Hz)		1376
640 × 480 (85 Hz)	832	1280	× 768 (50 Hz)		1648
800 × 600 (60 Hz)	1056	1280	× 768 (60 Hz)		1680
800 × 600 (70 Hz)	1040	1280	× 768 (75 Hz)		1712
800 × 600 (75 Hz)	1056	1280	× 1024 (60	Hz)	1688
800 × 600 (85 Hz)	1048	1600	× 1200 (60	Hz)	2160
1024 × 768 (60 Hz)	1344	1920	× 1200 (60	Hz)	2080

37