Main Menu (continued)
GPI
“GPI CONTROL” is used to enable and disable GPI functions and assign functions to each of the GPI terminal pins ( page 48).
|
| Underlined values indicate factory defaults. |
|
|
|
Sub menu | Settings | Description |
|
|
|
GPI CONTROL | DISABLE | Enables and disables GPI functions |
| ENABLE | <DISABLE> Disabled |
|
| <ENABLE> Enabled |
|
|
|
GPI1 - GPI8 | UNDEF | Assigns functions to the GPI control terminal pins. |
| MARKER1 ON/OFF | The same items can be set to each terminal ( page |
| MARKER2 ON/OFF | 48). |
| MARKER BACK |
|
| HALF |
|
| MARKER BACK |
|
| BLACK |
|
| CENTER MARKER |
|
| INPUT SEL. VIDEO |
|
| INPUT SEL. SDI1 |
|
| INPUT SEL. SDI2 |
|
| INPUT SEL. |
|
| YPBPR/RGB |
|
| INPUT SEL. |
|
| SD ASPECT |
|
| SCAN |
|
|
| |
|
| |
| MONO |
|
| GAMMA SEL. FILM |
|
| GAMMA SEL. |
|
| STDIO/PST |
|
| SELECT SYNC |
|
|
|
|
Note:
This function is not available when,
•“SD ASPECT” operation when input signal is HD or PC
•“SCAN” operation when the input signal is PC
•“GAMMA SELECT” operation when the input signal is PC
•“SELECT SYNC” operation when anything other than
•“MONO” operation when input signal is PC
35