Panasonic AJ-HDX400P operating instructions Time code related section, Ctl

Page 15

Chapter 2 Parts and their functions

2-5 Time code related section

4 5 6

2

9

1 3 2

1GENLOCK IN connector (BNC)

The HD Y reference signal is supplied to this connector when the camera unit is to be gen-locked or the time code is to be externally locked. It is also possible to supply NTSC composite video signals instead as the reference signal.

2TC IN connector (BNC)

Supply the time code which will serve as the reference to this connector when externally locking the time code.

3TC OUT connector (BNC)

To lock the time code of an external VTR to the unit’s time code, connect this connector to the time code input (TC IN) connector on the external VTR.

4HOLD button

The time data display of the counter display section which was on the screen at the moment when this button is pressed is held. (However, the time code generator keeps running.) When the button is pressed again, the hold status is released.

It is used, for instance, to find out the time code or CTL counter value at which a particular scene was shot.

8 7

7“+” button, “–” button

These are used to increment or decrement by 1 the figure in the digit which was made to flash by the SHIFT button 8 when the time code or user bits are to be set.

8SHIFT button

This causes the digit to be set to flash when the time code or user bits are to be set.

9TCG (time code selector) switch

This is used to set the running mode of the built-in time code generator.

F-RUN :Set here to have the time code run all the time

regardless of the VTR’s operation.

This position is used to align the time code with the time or externally lock the time code.

SET : Set here when the time code or user bits are to be set.

R-RUN :Set here to have the time code run only during recording. The time code on the tape with scene- to-scene continuity is recorded continuously.

5RESET button

This is used to reset the time data on the counter display section to “00:00:00:00.” If it is pressed while the TCG switch 9 is at the SET position, the time code data and user bits data are respectively reset to “00:00:00:00.”

6DISPLAY switch

This is used to display the time code, CTL or user bits on the counter display section depending on the setting positions of this switch and the TCG switch 9.

UB

: The user bits are displayed.

TC

: The time code is displayed.

CTL

: CTL is displayed.

15

Image 15
Contents Model No. AJ Operating Instructions Camera/VTRFCC Note Do not Remove Cover or BackNi-Cd Contents Chapter Maintenance Inspections SpecificationsMenu description tables Features of the camera unit Features of the VTR unit AJ-HDX400P System configurationPower supply and accessory mounting section Audio function section input system FrontRear Audio function section output system Shooting and recording camera unit Bars Shooting and recording VTR unitCAM. Auto Knee on CAM. Auto Knee OFFLT BOX ScropSqueeze Menu button Setup card insertion slotBusy operation mode display lamp Menu operation sectionCTL Time code related sectionDisplays relating to the VTR unit’s operations and modes Displays relating to the time code Time code-related switch settings and display itemsMode displays TCG switch position Display switch Display item PositionViewfinder section Cassette tapes Basic procedures From providing the power supply to loading the cassetteUp to performing the switch settings Tape function buttons Procedure for shootingAdjust the white balance 3When adjusting the white balance on the spotScene-to-scene continuity Scene-to-scene continuity during rec-pauseEnsuring scene-to-scene continuity at other times ONE Shot Procedure for shooting in the on modesPRE-RECORDING function Interval REC functionWhen the Interval REC mode is to be exited When recording is to be suspended at any timeWhen the recording is to be When the ONE Shot mode of Interval REC is to be exitedNormal playback and playback at different speeds When the Retake function is to be exitedRetake function Rec-review functionOutput CAM Adjusting the white balance and black balanceAdjusting the white balance White balance detection areaWhite balance memories When there is no time to adjust the white balanceWhen the white balance cannot be adjusted automatically Auto tracking white balance settingUse this to execute ABB Adjusting the black balanceAuto W/B BAL switch Black balance memoryViewfinder screen displays relating to the shutter Setting the electronic shutterSetting the shutter mode and speed Shutter modesSelecting the recording signals and recording system Setting the synchro scan modeSelecting the audio input signals MIC Adjusting the audio signal recording levels3 CH3 and CH4 recording levels Auto LevelUser bit memory function Setting the time dataSetting the user bits Tape continuity with the user bitsRegion Setting the internal clock’s date and timeExternally locking the time code Setting the time codeTime code when the battery is replaced Operating procedure for external lockingExamples Setting the Umid informationConcerning the user bit setting during external lock To release the external lockMenu configuration Menu displays on the viewfinder screenBasic menu operations To set an item to on or OFF Selecting the user menusTo increment the value To decrement the valueSelecting the viewfinder screen display items Viewfinder screen status display configurationViewfinder screen status displays Viewfinder lamp displaysMode Check Display item What is displayed Status when display appearsCheck Filter Line MIX Gain Iris, f-value Battery typeRemaining battery = Iris overrideSpeed/mode Color temperatureViewfinder screen display selection ShutterSetting the marker displays Setting the camera IDSetting change/adjustment result messages and display modes Marker check screen displays Marker Select button function Mode check screen displays Mode Check button functionSetting items and details Menu-driven function setupSetting the User SW Gain switching Selecting the video output signalsSetting items and what is set Selecting the F.AUDIO Level control functionFunctions which can be selected Setting the color temperature manually Handling the setup cardData handling Selecting the file No Setup card operationsFormatting the setup card Saving the data settings on the cardGiving a title to the selected file Saving the data settings to the selected fileLoading the data of the selected file Loading the data saved on the cardHow to use the user data Writing the setting data in the user areaLoading the user data How to use the scene file data Writing the setting data used for the scene filesReading the setting data used for the scene files Scene Read User Data Scene SEL # Read Write Reset Scene Read User Data Scene SEL Write Reset How to use the lens file data White BAL switchOperation method without performing File menu operations Reference Supplying the powerAttaching the battery and setting the battery type Using the Anton Bauer battery packUsing the NP-1 type battery pack Using the V-mount type battery packNP-1 type Battery case Attaching the lens Using an AC power supplyWhen the AJ-B75 AC adapter made by Panasonic is used Pin no SignalAdjusting the lens flange Lens socketApprox meters OFF Adjusting the white shading of the lensGiving a title to the selected file no Storing the lens file dataReading the lens file data Audio input signal preparations When using the front microphoneWhen using an external microphone Mounting the unit on a tripod When using a wireless receiverWhen using an audio component When using a UniSlot wireless receiverExample showing use of the SHAN-RC700 rain cover Adjusting the position of the shoulder padConnecting the extension control unit AJ-EC3P Attaching the shoulder beltFront Audio Attaching the Front Audio Level control knobInspections prior to shooting Preparation for inspectionsInspecting the camera unit Tape travel inspection Automatic audio level adjustment function inspectionManual audio level adjustment function Inspection Inspecting the VTR unitInspection using external microphones Self-diagnosis functionInspections relating to the time code and user bits Maintenance HA16PRM-3SG Connectors and signalsPush NC5FBHREC Warning Battery ENDSlack Tape ENDTape Near END Wireless RFBattery Near END ServoEmergency eject screw Push in and turn at the same time Error codesCode No Description of error Emergency ejectMenu configuration How to open the menusHow to interpret the menu lists ONE Shot REC FunctionOutput SEL Variable Remarks Data storage RangeOption Mode Genlock1 ROP Color Correction MatrixMID Setting LOW SettingAdditional DTL High SettingSkin Tone DTL Direction=SKIN Tone Area Flare 12 $ Camera SettingsAll items in Camera Setting are setting targets of the item GammaHold VF DisplaysVF Marker Zebra pattern displayVF INDICATOR1 VF INDICATOR2User BOX Shutter Speed Mode Check INDCamera ID 7 !LEDUser SW Shutter SelectArib SW ModeSmpte SplitUser SW Gain White Balance ModeCard R/W Select FileIris Card READ/WRITEInitialize DiagnosticLens File System CheckVTR Function BATTERY/TAPEBlack Shading White ShadingHYTRON100 Battery SETTING1Manual Data storage RangeENDURA50*1 ENDURA80*1ENDURA-D*2 Battery SETTING2 DIGITAL14END 6 MIC/AUDIO2 5 MIC/AUDIO1Umid SET/INFO 7 TC/UBDowncon Setting VTR DiagOption Audio System Video SystemConnector Section Audio Input Connectors Memo Panasonic Broadcast & Television Systems Company

AJ-HDX400P specifications

The Panasonic AJ-HDX400P is a versatile HD camcorder renowned for its exceptional image quality and professional-grade features. This camera is optimized for broadcast and production environments, delivering exceptional performance in a compact design.

One of the standout features of the AJ-HDX400P is its ability to record in multiple formats, including DVCPro HD, DVCPRO50, and DVCPRO. This flexibility allows users to choose the best format for their specific needs, making it suitable for various applications, from documentaries to commercial productions. The camcorder supports high-definition resolutions of up to 1080i, ensuring that the final output meets industry standards.

The camera is equipped with a three-CCD sensor system, which provides outstanding color reproduction and detail. Each CCD chip specializes in capturing specific color information, resulting in rich, vibrant images free from color artifacts. With a resolution of 1280 x 720p and the ability to capture 720p and 1080i formats, the AJ-HDX400P excels in delivering superior image clarity and fluid motion.

In addition to its recording capabilities, the AJ-HDX400P features advanced image processing capabilities. The camera utilizes a high-quality digital signal processor, which ensures that noise reduction is effectively handled, particularly in low-light conditions. This feature is crucial for producing clean and polished footage without compromising quality.

The Panasonic camcorder also boasts an extensive range of connectivity options. Users can benefit from HD-SDI and analog outputs, allowing for versatile connections to monitors and other recording devices. The presence of IEEE 1394 for digital output further enhances its compatibility with various editing systems, streamlining the post-production workflow.

Another notable characteristic of the AJ-HDX400P is its ergonomic design. It is built for extensive usage, featuring a lightweight yet durable chassis. The camcorder has an adjustable viewfinder and an intuitive user interface that make it easy to operate, even in high-pressure shooting environments.

Furthermore, the AJ-HDX400P supports a range of professional accessories, including lenses, microphones, and battery packs, enhancing its functionality for different shooting conditions. This adaptability makes it a reliable choice for videographers and production houses looking for a high-quality recording solution.

In summary, the Panasonic AJ-HDX400P stands out as a feature-rich, professional HD camcorder that combines advanced imaging technology, versatile recording formats, and user-friendly design, making it ideal for a wide array of filming scenarios. Its robustness and exceptional performance solidify its position as a reliable tool in the hands of creative professionals.