Panasonic AJ-HDX400P operating instructions Attaching the Front Audio Level control knob

Page 67

Chapter 5 Preparation

<Notes>

≥Before connecting or disconnecting the dedicated cable, be absolutely sure to set the POWER switches on the unit and the AJ-EC3P to OFF.

≥If the ECU DATA SAVE item on the <SW MODE> screen is set to OFF, the camera related settings among the adjustments and settings performed using the AJ-EC3P will be erased when the unit’s POWER switch is set to OFF. In addition, it will not be possible to write this data to the setup card.

It is however possible for the menu content settings to be written on the setup card.

When the unit is connected once again to the AJ-EC3P, the settings of the AJ-EC3P are restored.

≥When ON has been selected as the ECU DATA SAVE item setting on the <SW MODE> screen, the adjustments and settings performed using the AJ-EC3P will not be erased even when the unit’s POWER switch is set to the OFF position.

≥The unit’s USER switch does not function when the AJ- EC3P is connected.

≥When the AJ-EC3P is used to control the unit’s shutter, the shutter speed settings on the unit’s menu are used rather than the shutter speeds engraved on the AJ-EC3P. The correspondence between the shutter speed indications on the AJ-EC3P and the unit’s shutter speed settings are shown in the table below.

AJ-EC3P shutter speed indication

Unit shutter speed setting

S.S

SYNCHRO SCAN

S.V

POSITION1

100 (60)

POSITION1

120

POSITION2

250

POSITION3

500

POSITION4

1000

POSITION5

2000

POSITION6

5-9 Attaching the FRONT AUDIO LEVEL control knob

When the FRONT AUDIO LEVEL control is to be operated frequently, the accessory knob can be attached to make it easier to operate the control.

FRONT AUDIO

LEVEL control

 

Knob (accessory)

 

 

Screw

5

Index

(accessory)

Screw 5 marks

 

Remove the screw at the center of the FRONT AUDIO LEVEL control, and secure the accessory knob to the control and unit behind using the same screw (accessory). Make sure that the index mark on the knob side is aligned with the index mark on the control side.

67

Page 66 Page 68
Image 67
Page 66 Page 68
Contents Model No. AJ Operating Instructions Camera/VTRDo not Remove Cover or Back FCC NoteNi-Cd Contents Specifications Chapter Maintenance InspectionsMenu description tables Features of the camera unit Features of the VTR unit AJ-HDX400P System configurationPower supply and accessory mounting section Front Audio function section input systemRear Audio function section output system Shooting and recording camera unit Bars Shooting and recording VTR unitCAM. Auto Knee on CAM. Auto Knee OFFScrop LT BOXSqueeze Menu button Setup card insertion slotBusy operation mode display lamp Menu operation sectionCTL Time code related sectionDisplays relating to the VTR unit’s operations and modes Displays relating to the time code Time code-related switch settings and display itemsMode displays TCG switch position Display switch Display item PositionViewfinder section Cassette tapes From providing the power supply to loading the cassette Basic proceduresUp to performing the switch settings Tape function buttons Procedure for shootingAdjust the white balance 3When adjusting the white balance on the spotScene-to-scene continuity during rec-pause Scene-to-scene continuityEnsuring scene-to-scene continuity at other times ONE Shot Procedure for shooting in the on modesPRE-RECORDING function Interval REC functionWhen the Interval REC mode is to be exited When recording is to be suspended at any timeWhen the recording is to be When the ONE Shot mode of Interval REC is to be exitedNormal playback and playback at different speeds When the Retake function is to be exitedRetake function Rec-review functionOutput CAM Adjusting the white balance and black balanceAdjusting the white balance White balance detection areaWhite balance memories When there is no time to adjust the white balanceWhen the white balance cannot be adjusted automatically Auto tracking white balance settingUse this to execute ABB Adjusting the black balanceAuto W/B BAL switch Black balance memoryViewfinder screen displays relating to the shutter Setting the electronic shutterSetting the shutter mode and speed Shutter modesSetting the synchro scan mode Selecting the recording signals and recording systemSelecting the audio input signals MIC Adjusting the audio signal recording levels3 CH3 and CH4 recording levels Auto LevelUser bit memory function Setting the time dataSetting the user bits Tape continuity with the user bitsRegion Setting the internal clock’s date and timeExternally locking the time code Setting the time codeTime code when the battery is replaced Operating procedure for external lockingExamples Setting the Umid informationConcerning the user bit setting during external lock To release the external lockMenu displays on the viewfinder screen Menu configurationBasic menu operations To set an item to on or OFF Selecting the user menusTo increment the value To decrement the valueSelecting the viewfinder screen display items Viewfinder screen status display configurationViewfinder screen status displays Viewfinder lamp displaysMode Check Display item What is displayed Status when display appearsCheck Filter Line MIX Gain Iris, f-value Battery typeRemaining battery = Iris overrideSpeed/mode Color temperatureViewfinder screen display selection ShutterSetting the camera ID Setting the marker displaysSetting change/adjustment result messages and display modes Marker check screen displays Marker Select button function Mode check screen displays Mode Check button functionSetting items and details Menu-driven function setupSetting the User SW Gain switching Selecting the video output signalsSelecting the F.AUDIO Level control function Setting items and what is setFunctions which can be selected Handling the setup card Setting the color temperature manuallyData handling Selecting the file No Setup card operationsFormatting the setup card Saving the data settings on the cardGiving a title to the selected file Saving the data settings to the selected fileLoading the data of the selected file Loading the data saved on the cardWriting the setting data in the user area How to use the user dataLoading the user data Writing the setting data used for the scene files How to use the scene file dataReading the setting data used for the scene files Scene Read User Data Scene SEL # Read Write Reset Scene Read User Data Scene SEL Write Reset White BAL switch How to use the lens file dataOperation method without performing File menu operations Reference Supplying the powerAttaching the battery and setting the battery type Using the Anton Bauer battery packUsing the V-mount type battery pack Using the NP-1 type battery packNP-1 type Battery case Attaching the lens Using an AC power supplyWhen the AJ-B75 AC adapter made by Panasonic is used Pin no SignalLens socket Adjusting the lens flangeApprox meters OFF Adjusting the white shading of the lensGiving a title to the selected file no Storing the lens file dataReading the lens file data When using the front microphone Audio input signal preparationsWhen using an external microphone Mounting the unit on a tripod When using a wireless receiverWhen using an audio component When using a UniSlot wireless receiverExample showing use of the SHAN-RC700 rain cover Adjusting the position of the shoulder padConnecting the extension control unit AJ-EC3P Attaching the shoulder beltFront Audio Attaching the Front Audio Level control knobPreparation for inspections Inspections prior to shootingInspecting the camera unit Tape travel inspection Automatic audio level adjustment function inspectionManual audio level adjustment function Inspection Inspecting the VTR unitSelf-diagnosis function Inspection using external microphonesInspections relating to the time code and user bits Maintenance HA16PRM-3SG Connectors and signalsPush NC5FBHREC Warning Battery ENDSlack Tape ENDTape Near END Wireless RFBattery Near END ServoEmergency eject screw Push in and turn at the same time Error codesCode No Description of error Emergency ejectHow to open the menus Menu configurationHow to interpret the menu lists ONE Shot REC FunctionOutput SEL Variable Remarks Data storage RangeGenlock Option Mode1 ROP Color Correction MatrixMID Setting LOW SettingAdditional DTL High SettingDirection Skin Tone DTL=SKIN Tone Area Flare 12 $ Camera SettingsAll items in Camera Setting are setting targets of the item GammaHold VF DisplaysVF Marker Zebra pattern displayVF INDICATOR2 VF INDICATOR1User BOX Shutter Speed Mode Check INDCamera ID 7 !LEDUser SW Shutter SelectArib SW ModeSmpte SplitUser SW Gain White Balance ModeCard R/W Select FileIris Card READ/WRITEInitialize DiagnosticLens File System CheckVTR Function BATTERY/TAPEBlack Shading White ShadingHYTRON100 Battery SETTING1Manual Data storage RangeENDURA80*1 ENDURA50*1ENDURA-D*2 DIGITAL14 Battery SETTING2END 6 MIC/AUDIO2 5 MIC/AUDIO1Umid SET/INFO 7 TC/UBVTR Diag Downcon SettingOption Audio System Video SystemConnector Section Audio Input Connectors Memo Panasonic Broadcast & Television Systems Company

AJ-HDX400P specifications

The Panasonic AJ-HDX400P is a versatile HD camcorder renowned for its exceptional image quality and professional-grade features. This camera is optimized for broadcast and production environments, delivering exceptional performance in a compact design.

One of the standout features of the AJ-HDX400P is its ability to record in multiple formats, including DVCPro HD, DVCPRO50, and DVCPRO. This flexibility allows users to choose the best format for their specific needs, making it suitable for various applications, from documentaries to commercial productions. The camcorder supports high-definition resolutions of up to 1080i, ensuring that the final output meets industry standards.

The camera is equipped with a three-CCD sensor system, which provides outstanding color reproduction and detail. Each CCD chip specializes in capturing specific color information, resulting in rich, vibrant images free from color artifacts. With a resolution of 1280 x 720p and the ability to capture 720p and 1080i formats, the AJ-HDX400P excels in delivering superior image clarity and fluid motion.

In addition to its recording capabilities, the AJ-HDX400P features advanced image processing capabilities. The camera utilizes a high-quality digital signal processor, which ensures that noise reduction is effectively handled, particularly in low-light conditions. This feature is crucial for producing clean and polished footage without compromising quality.

The Panasonic camcorder also boasts an extensive range of connectivity options. Users can benefit from HD-SDI and analog outputs, allowing for versatile connections to monitors and other recording devices. The presence of IEEE 1394 for digital output further enhances its compatibility with various editing systems, streamlining the post-production workflow.

Another notable characteristic of the AJ-HDX400P is its ergonomic design. It is built for extensive usage, featuring a lightweight yet durable chassis. The camcorder has an adjustable viewfinder and an intuitive user interface that make it easy to operate, even in high-pressure shooting environments.

Furthermore, the AJ-HDX400P supports a range of professional accessories, including lenses, microphones, and battery packs, enhancing its functionality for different shooting conditions. This adaptability makes it a reliable choice for videographers and production houses looking for a high-quality recording solution.

In summary, the Panasonic AJ-HDX400P stands out as a feature-rich, professional HD camcorder that combines advanced imaging technology, versatile recording formats, and user-friendly design, making it ideal for a wide array of filming scenarios. Its robustness and exceptional performance solidify its position as a reliable tool in the hands of creative professionals.
Top Page Image Contents