Panasonic AJ-HDC27A operating instructions Emergency eject, Error codes, 107

Page 107

Emergency eject

If the cassette cannot be ejected by pressing the EJECT button, use a screwdriver or similar tool to press and turn the EMERGENCY screw. This enables the cassette to be removed.

1 Set the power to OFF.

2 Remove the rubber cap where shown in the figure. Insert a Phillips head screwdriver into the cross- shaped part of the EMERGENCY screw (red).

1 Set the power to OFF.

4 Cassette holder

2,5

EMERGENCY screw

3 Push in and turn at the same time.

OThis screw needs to be rotated through about 20 turns after the first turn until the unloading can be started.

OThis screw needs to be rotated through about 90 turns after the first turn until the tape is ejected.

3 While pushing in with the screwdriver, turn the EMERGENCY screw counterclockwise until the tape is ejected.

OThis screw needs to be rotated through about 20 turns after the first turn until the unloading can be started.

OThis screw needs to be rotated through about 90 turns after the first turn until the tape is ejected.

4 Remove the cassette.

5 Return the rubber cap to its original position.

<Notes>

O Do not turn the EMERGENCY screw except in an emergency.

O Do not turn the screw clockwise. Stop turning the screw as soon as the tape is ejected. Otherwise, the mechanism may be damaged.

O After the tape is ejected, the cassette holder will not lock into place even when an attempt is made to close it. Be sure to turn the power off and turn it back on to reset the mechanism’s operation, and then close the cassette holder.

O A clicking sound will be heard when the EMERGENCY screw is turned: this sound is made by the reel drive operation and is therefore not indicative of a malfunction.

Error codes

One of the following error codes appears in the display window when an error has occurred in the unit for some reason.

Code No.	Description of error

07	Pinch solenoid problem

08	Cleaning solenoid problem

0B	Supply reel problem

0C	Take-up reel problem

0D	Capstan problem

0E	Cylinder problem

0F	Loading problem

3F	Servo problem

107

Image 107

Contents AJ- P FCC Note Indicates safety informationContents CAM Menus Setting menu screensIntroduction FeaturesFeatures of the camera unit Character display function Piece filter disc sets available as standard accessoriesRemote control Wide-ranging video gain selectionFeatures of the VTR unit AJ-EC3 System ConfigurationFUJINON/CANON SHAN-RC700Parts and their functions Power supply sectionAn audio component or microphones are connected here Audio in audio input selector switchCUE switch Audio function section= Monitor Select audio channel selector switch DC OUT DC power output socketAlarm warning alarm volume adjustment control Monitor volume adjustment controlViewfinder section $ Examples of filter selection Synchro scan adjustment switchesWhite BAL white balance memory selector switch Gain gain selector switch Output output signal selector/AUTO Knee switch$ OUTPUT/AUTO Knee switch setting position SDI switch Shutter switchECU Remote remote control connector 6- pin HD SDI OUT connector BNCVTR Start button Character switch= VTR SAVE/STBY tape protection switch REW button Mode Check button? User 1 and User 2 buttons @ Eject buttonDisplay window Back tally switchLight switch Back tally lamp unitTime code related section Menu operation sectionHold button Reset buttonDisplay switch TCG time code selector switchRemoval lever Battery pack Power supplyUsing the Anton/Bauer battery pack Power output socket for lighting Lighting control switchUsing the Panasonic AU-BP402 battery pack Using the Sony BP-90 battery pack Using the Sony NP-1 battery packPin no Using the Sony BP-L60/L90 lithium- ion batteryUsing an AC power supply When the AJ-B75 AC adapter is usedLens socket Attaching the lensMount cap MarkApprox meters Adjusting the lens flangeAdjustment method Menu button JOG dial button Adjusting the white shadingGain L 0 dB Shutter OFFCAM Main Menu White BAL switch Or B Auto W/B BAL switchStopper screw Attaching the viewfinderLever Viewfinder Adjusting the viewfinder positionMic holder Locking screw Audio in switchesAudio input preparation AJ-HVF27PLocking screw When attaching a microphone to the main unit for useAttaching the AJ-MH700P mic holder optional accessory Screws provided with mic holderAudio in connectors When connecting a microphone to the MIC in jackWhen connecting a microphone to the Audio in connector When connecting audio components When using a wireless microphoneTripod attachment Red lever Mounting the unit on a tripodTripod attachment Pan head Bottom section Adjusting the shoulder pad positionAttaching the shoulder strap Example showing use of the Shan RC700 rain cover Connecting the extension control unitAttaching the rain cover TALLY/REC recording lamp Batt battery lampVTR Save VTR power-saving lamp Viewfinder lamp displaysSetting item Description of setting Setting the lamp displaysViewfinder screen status displays $ Display items and where they are displayedColor temperature display PRE/A/B Battery voltage displaySafety zone markers @ Master gain setting displaySelecting the display items On the VF Indicator screen of CAM MenuSelecting the display items Selectable itemsScan Display modes and setting change messagesSetting change/adjustment result messages and display modes MessageSetting the marker displays Switching the display modeSetting the camera ID Displays relating to time codes Displays relating to errors and warningsTime code-related switch settings and display items Screen displaysAdjustments and setup using the setting menus Adjusting the date and timeOutput CAM Adjusting the white balance and black balanceAdjusting the white balance Set the switches as shown in the figureWhen the color temperature is higher than 5600 K Message appearing while the adjustment is in progressMessage appearing upon completion of the adjustment When the color temperature is lower than 2500 KWhite balance memories When the white balance cannot automatically be adjustedWhen there is no time to adjust the white balance Messages relating to white balance adjustmentExample of display When Filter INH is set to onAuto W/B switch Adjusting the black balanceAvailable shutter modes and shutter speeds Setting the electronic shutterSetting the shutter mode and speed Shutter modesSetting the synchro scan mode Changing the shutter speed and mode selection rangeAudio Level Adjusting the audio levelManual audio level adjustments LimiterButton Setting the time dataSetting the user’s bit + buttonTime code when the battery is replaced Setting the time codeExample of connections for external lock When locking to an external signalUser’s bit setting when the time code is externally locked Externally locking the time codeLoading the user data How to use the user dataUser data operation Saving the user dataHow to insert the setup card Setup card operationsHow to eject the setup card Error Formatting the setup cardError message Remedial action Config NGSelect the file No Saving the data settings on the cardGive a title to the selected file Write NG Format ErrorNo File Loading the data saved on the cardLoad the data of the selected file Read NGEjecting the cassette tape Ejecting the cassette when the battery has no chargeCassette tapes Loading a cassette tapeRecording From providing the power supply to loading the cassetteTape function buttons ShootingEnsuring scene-to-scene continuity at other times Scene-to-scene continuityDuring rec-pause Playback checking what has been recorded Lens RET button functionsRec review Color playbackInterval REC intermittent recording function Other VTR functionsNews REC function Retake functionEngineer menu When the power is switched on Status displayMenu operations User menuEngineer menu Basic setting menu operationsDisplaying menus User menuPress the JOG Dial button Displaying sub-menus and deciding on settingsOperations common to the user menu and engineer menu ExampleCAM Main Menu Setting menu configurationSAT/PHASE F16 ADJ Shutter White Preset Extender Filter Black STRSetting menu configuration PRO14 TRIM14 TRIM13 DIGITAL14 DIGITAL13 VTR Main MenuCAM Main Menu 3 screen Setting menu screens CAM MenuCAM Main Menu 1 screen CAM Main Menu 2 screenROP Remote Operation Panel is set on this screen Setting menu screens CAM Main MenuROP screen Matrix screenSAT User Phase ENGColor Correction 1 screen Color Correction 2 screenMiddle level gain is set on this screen LOW Setting screenMID Setting screen Low level gain is set on this screenHigh level gain is set on this screen High Setting screenAdditional DTL 1 screen Additional DTL2 screenSkin tone detail of the camera is set on this screen Knee settings of the camera are performed on this screenSkin Tone DTL screen KNEE/LEVEL screenGamma screen Camera Setting screenGamma settings of the camera are performed on this screen Change VF Display screenVF Marker screen NormalIris VF Indicator screenCamera ID screen Camera ID is set on this screenShutter speed is set on this screen Shutter Speed screenLED screen Smpte Camera SW Mode screenModes of the camera switches are set on this screen Super Gain screenExample CAM Card READ/WRITE screenCAM Card R/W Select screen Lens ADJ screen Lens adjustments are performed on this screenGENLOCK/IRIS screen CAM User Menu Select 3 screen CAM User Menu Select 1, 2 and 3 screensCAM User Menu Select 1 screen CAM User Menu Select 2 screenColorimetry screen Black Shading screenFlare screen White Shading screenOption screen Diagnostic screenInitialize screen Evaluation screenOSensitivity measurement screen OResolution measurement screenOS/N measurement screen OModulation measurement screenVTR Main Menu screen Setting menu screens VTR MenuVTR’s functions are set on this screen Setting menu screens VTR Main MenuFunction screen TRIM13 BATTERY/TAPE screenPRO14 TRIM14Battery Setting screen MIC/AUDIO screen VTR VF Indicator screenMIC/AUDIO settings are performed on this screen MIX ChselCH1/2 CH3/4Regen PresetTC/UB screen 100EXT 101Time VTR Card READ/WRITE screen Time Date screenVTR Initialize screen VTR User Menu Select screen103 104 What the warning Indicates 105LCD display Tally lampLamp flashes once a second 106Indicates VTR unit’s operation 107 Error codesEmergency eject Cleaning inside the viewfinder MaintenanceReplacing the backup battery Condensation Head cleaning109 Inspections prior to shootingPreparation for inspection Inspecting the camera unitInspecting the viewfinder Tape travel inspection Inspecting the aperture and zoom functionsInspecting the VTR unit Earphone and speaker inspection Automatic audio level adjustment function inspectionManual audio level adjustment function inspection Inspection using external microphonesSpecifications VTR Tape Transport System Connector SectionVTR Video System VTR Audio SystemRelating to external VTRs Relating to power supplyMaintenance products ViewfinderVQT9102-1 F1200W1021 @