Panasonic AJ-HDC27A operating instructions Setting menu screens VTR Main Menu, Function screen

Setting menu screens (VTR MAIN MENU)

FUNCTION screen

The VTR’s functions are set on this screen.

Item	Variable	VF	Remarks
	range	display
NEWS REC	OFF	USER	For selecting the VTR
MODE	0.2	ENG	START button
	:		acknowledgment time
	2.0		during recording.
			OFF:
			The pressing of the VTR
			START button is
			acknowledged
			immediately, recording is
			stopped, and the unit is set
			to the REC PAUSE mode.
			0.2—2.0:
			The pressing of the VTR
			START button is not
			acknowledged and
			recording is continued for
			the time set (in increments
			of 0.2 sec.).
HUMID OPE	ON	USER	For selecting the VTR
	OFF	ENG	operation when
			condensation has formed.
			ON : Operation is
			continued as usual.
			OFF : Operation of all
			controls except the
			POWER switch and
			EJECT button is
			inhibited.
REC START	ALL	USER	For selecting
	NORMAL	ENG	acknowledgement of recording
			started by the VTR START
			button.
			ALL:
			The start of the recording is
			acknowledged regardless of
			the VTR mode.
			NORMAL:
			The start of the recording is
			acknowledged only in the
			STOP (POWER SAVE) mode
			and REC PAUSE mode.
PAUSE TIMER	10	USER	For selecting the amount of
	20	ENG	time REC PAUSE is to be held.
	30		10/20/30/60: 10, 20, 30 or 60
	60		minutes.
RETAKE MODE	ON	USER	Functions for rewinding
	OFF	ENG	the tape to the position
			where recording started.
			ON : The RETAKE
			function works.
			OFF : The RETAKE
			function does not
			work.
			<Note>
			The RETAKE function is
			set OFF when the unit’s
			power switch has been set
			to ON.

Item	Variable	VF	Remarks
	range	display
HD SDI OUT	ON	USER	For controlling the output
	SIDE SW	ENG	signals of the HD SDI OUT
	AUTO		connector.
	OFF		However, ON or OFF
			cannot be selected for
			these signals during
			recording: the status prior to
			the start of the recording is
			maintained.
			ON:
			The signals are forcibly
			output. However, the
			signals are output in the
			EE/PB mode when the
			MONITOR OUT SDI
			switch on the side panel is
			set to OFF.
			SIDE SW:
			The signals are not output
			when the MONITOR OUT
			SDI switch on the side
			panel is set to OFF.
			AUTO:
			The signals are output
			when the connector has
			been connected to the
			output connector.
			However, the signals are
			output in the EE/PB mode
			when the MONITOR OUT
			SDI switch on the side
			panel is set to OFF.
			OFF:
			The output is stopped.
INTERVAL REC	ON	USER	For selecting the
MODE	OFF	ENG	intermittent recording
			mode.
			ON:
			Intermittent recording is
			performed.
			OFF:
			Intermittent recording is
			not performed.
			<Note>
			Intermittent recording is
			set OFF when the unit’s
			power switch has been set
			to ON.
INTERVAL REC	00s10f	USER	For setting the REC time for
TIME	:	ENG	intermittent recording.
	59s29f		<Note>
			When REC time is set at
			less than 1 second, the
			initial recording time will
			be 1 second.
INTERVAL	00h00m02s	USER	For setting the REC
PAUSE TIME	:	ENG	PAUSE time for
	23h59m59s		intermittent recording.

The underlining in the variable range column indicates the setting in the preset mode.

95