System connections
Preparation for Use
6
Make sure to unplug the AC power lead before making any connections.
AM loop aerial
FM aerial
Right speaker | Left speaker |
Wall socket
(AC 230 - 240 V, 50 Hz)
White line
Plain
"Aerial connection
Connect the FM/AM loop aerial to the ANTENNA socket.
Position the FM aerial wire and rotate the AM loop aerial for opti- mum reception. Place the AM loop aerial on a shelf, or attach it to a stand or a wall.
Notes:
!Placing the aerial on the unit or near the AC power lead may cause noise pickup. Place the aerial away from the unit for better reception.
!Do not connect the attached FM aerial to an external aerial as this may cause trouble.
Installing the AM loop aerial: |
|
< Assembling > | < Attaching to the wall > |
Wall | Screws (not supplied) |
"Speaker connection
Connect the wire with the white line to the minus
Caution:
!Do not let the bare speaker wires touch each
other.
! Use speakers with an impedance of 4 ohms or |
|
more, as lower impedance speakers can damage |
|
the unit. | Incorrect |
! Do not mistake the right and the left channels. | |
The right speaker is the one on the right side |
|
when you face the unit. |
|
Placing the speaker system:
There is no distinction between the right and the left speakers.
04/10/21 | TINSEA036SJZZ |