Sharp CP-S10H To interrupt playback Main unit operation, To stop playback, To remove the disc

1Press the ON/STAND-BY button to turn the power on.

2Press the FUNCTION button until "CD DISC" appears on the display.

When operating with the remote control, press the CD button.

3Press the CD EJECT button to open the disc compart- ment.

4Place the disc on the spindle, label

side up.

5Close the disc compartment by firmly pushing the corner marked "PUSH CLOSE".

	[MP3]	MP3 track indicator
	Total number of tracks
[CD]	[WMA]	WMA track indicator
Total number	Total playing Total number of tracks
of tracks	time

!Due to the structure of its disc information, it takes longer (approximately 20 to 90 seconds) to read a CD-R/RW disc recorded in the MP3 or WMA format than a normal CD.

6Press the () button to start playback from track 1. Disc play indicator

When the last track on the disc has finished playing, the unit will stop automatically.

To interrupt playback:

Main unit operation:

Press the button.

To resume playback from the same point, press the button again.

Remote control operation:

Press the button.

To resume playback from the same point, press the button.

To stop playback:

Press the button.

To remove the disc:

Whilst in the stop mode, press the CD EJECT button.

Caution:

!Do not play discs with special shapes (heart or octagon shaped) as it may cause malfunctions.

!If a disc is damaged, dirty, or loaded upside down, "NO DISC" will appear on the display.

!Keep foreign objects out of the disc compartment.

!Subjecting the unit to shock or vibration may cause mistracking.

!When the unit is not being used, be sure to close the disc com- partment. If it is left open, the lens may be covered with dust and the unit may not operate properly.

!If TV or radio interference occurs during disc operation, move the unit away from it.

XL-MP10H

4

Disc Playback

11

04/10/21 XL-MP10H(A)E1.fm TINSEA036SJZZ