2
"AC power connection
After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket.
Note:
Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time.
"To turn the power on
Press the
After use:
Press the
2
Remote control
"Battery installation
1Remove the battery cover.
2Insert the supplied batteries according to the direction indi-
cated in the battery compartment.
When inserting or removing the batteries, push them toward the
battery terminals.
3Replace the cover.
Notes concerning use:
!Replace the batteries if the operating distance is reduced or if the operation becomes erratic. Purchase 2 "AA" size batteries (UM/
!Periodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth.
!Exposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit.
!Keep the remote control away from moisture, heat, shock, and vibrations.
for Use
Precautions for battery use:
!Replace all old batteries with new ones at the same time.
!Do not mix old and new batteries.
!Remove the batteries if the unit is not to be used for long periods of time. This will prevent potential damage due to battery leakage.
Caution:
!Do not use rechargeable batteries
!Installing the batteries incorrectly may cause the unit to malfunction.
Battery removal:
Remove the battery cover. Push each battery toward the battery terminal and take them out.
"Test of the remote control
Check the remote control after checking all the connections (see pages 6 - 7).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown:
Press the
Remote sensor
0.2 m - 6 m
Preparation
7
04/10/21 | TINSEA036SJZZ |