Panasonic DMC-FS20 operating instructions Auto LCD OFF, Off

Preparation

q[ECONOMY]

You can conserve the battery life by setting these menus.

p[POWER SAVE]:

The camera is automatically turned off if the camera has not been used for the time selected on the setting.

[OFF]/[2MIN.]/[5MIN.]/[10MIN.]

[AUTO LCD OFF]:

When taking pictures, the LCD monitor is automatically turned off if the camera has not been used for the time selected on the setting.

[OFF]/[15SEC.]/[30SEC.]

•Press the shutter button halfway or turn the camera off and on to cancel [POWER SAVE].

•[POWER SAVE] is set to [5MIN.] in the Intelligent auto mode.

•[POWER SAVE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].

•The status indicator lights while the LCD monitor is turned off. Press any button to turn on the LCD monitor again.

o[AUTO REVIEW]

Set the length of time that the picture is displayed after taking it.

[OFF]

[1SEC.]

[2SEC.]

[HOLD]: The pictures are displayed until one any of the buttons is pressed.

[ZOOM]: The picture is displayed for 1 second and then enlarged 4k and displayed for 1 more second.

•[AUTO REVIEW] is activated regardless of its setting when using auto bracket (P46), [HI-SPEED BURST] (P52) in scene mode and [BURST] (P64). (The pictures cannot be enlarged.)

•In Intelligent auto mode, the auto review function is fixed to [2SEC.].

v[NO.RESET]

Reset the file number of the next recording to 0001.

•The folder number is updated and the file number starts from 0001. (P84)

•A folder number between 100 and 999 can be assigned.

When the folder number reaches 999, the number cannot be reset. We recommend formatting the card (P24) after saving the data on a PC or elsewhere.

•To reset the folder number to 100, format the built-in memory or the card first and then use this function to reset the file number.

A reset screen for the folder number will then appear. Select [YES] to reset the folder number.

w[RESET]

The [REC] or [SETUP] menu settings are reset to the initial settings.

•When the [RESET] setting is selected during recording, the operation that resets the lens is also performed at the same time. You will hear the sound of the lens operating but this is normal and not indicative of malfunctioning.

•When [SETUP] menu settings are reset, the following settings are also reset. In addition, [FAVORITE] (P79) in [PLAYBACK] mode menu is set to [OFF], and [ROTATE DISP.] (P78) is set to [ON].

– The birthday and name settings for [BABY1]/[BABY2] (P50) and [PET] (P51) in scene mode.

VQT1M59 23