Panasonic DMC-FS20 Taking pictures that match the scene being, Portrait, REC mode ½¾

Advanced (Recording pictures)

[REC] mode: ½¾

Taking pictures that match the scene being

recorded (½¾: Scene mode)

When you select a scene mode to match the subject and recording situation, the camera sets the optimal exposure and hue to obtain the desired picture.

1

2

Slide the [REC]/[PLAYBACK] selector switch to [¦/!], and then press [MODE].

Move 3/4 to select [SCENE MODE1] or [SCENE MODE2], and then press [MENU/SET].

•If you set the scene modes you use frequently in [SCENE MODE1] and

[SCENE MODE2], you can then select them immediately which is very convenient.

3 Move 3/4/2/1 to select the scene mode.

•You can switch menu screens from any menu item by rotating the zoom lever.

4 Press [MENU/SET] to set.

•The menu screen is switched to the recording screen in the selected scene mode.

∫About the information

•If you press [DISPLAY] when selecting a scene mode in step 3, explanations about each scene mode are displayed. (If you press [DISPLAY] again, the screen returns to the scene mode menu.)

Note

•To change the scene mode, press [MENU/SET] and then move 1, and return to step 3 above.

•Refer to P41 for information about the shutter speed.

•The scene mode flash setting is reset to the initial setting when the scene mode is changed.

•When you take a picture with a scene mode that is not adequate for the purpose, the hue of the picture may differ from the actual scene.

•The following items cannot be set in scene mode because the camera automatically adjusts them to the optimal setting.

–[INTELLIGENT ISO]

–[SENSITIVITY]

–[COLOR MODE]

*[PORTRAIT]

When taking pictures of people outdoors during the daytime, this mode allows you to improve the appearance of the persons concerned and make their skin tones look healthier.

VQT1M59 47