Panasonic DMC-FS20 operating instructions Double-click on Removable Disk in My Computer

Connecting to other equipment

3 Double-click on [Removable Disk] in [My Computer].

•When using a Macintosh, the drive is displayed on the desktop. (“LUMIX”, “NO_NAME” or “Untitled” is displayed.)

4

5

Double-click [DCIM] folder.

Using a drag-and-drop operation, move the pictures you want to acquire or the folder storing those pictures to any different folder on the PC.

∫Disconnecting the USB connection cable safely

•Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of the digital camera before removing the hardware.

Note

•Do not use any other USB connection cables except the supplied one.

•Turn the camera off before connecting or disconnecting the AC adaptor (optional: DMW-AC5PP).

•Before inserting or removing a card, turn the camera off and disconnect the USB connection cable. Otherwise, data may be destroyed.

•With the Mac OS X v10.2 or an earlier operating system, set the Write-Protect switch of the SDHC memory card to the [LOCK] position when importing pictures from an SDHC memory card.

∫Viewing the contents of the built-in memory or card using the PC (folder composition)

≥Built-in memory			1	Folder number
	DCIM
≥Card
		100_PANA	2	File number

13 JPG: Pictures

100_PANA				MOV:	Motion pictures
	P1000001.JPG			MISC:	DPOF print
		2	3		Favorite
	P1000002.JPG

P1000999.JPG

101_PANA

999_PANA

MISC

A new folder is created when pictures are taken in the following situations.

•After [NO.RESET] (P23) in the [SETUP] menu has been executed

•When a card containing a folder with the same folder number has been inserted (Such as when pictures were taken using another make of camera)

•When there is a picture with file number 999 inside the folder

84 VQT1M59