Panasonic DMC-FS20 Sensitivity, Applicable modes · AUTO/100/200/400/800/1600

Advanced (Recording pictures)

Note

•Depending on the brightness and how fast the subject is moving, jitter may not be avoided.

•Movements may not be detected when a moving subject is small, when a moving subject is at the edge of the screen or when a subject has moved at the very moment when the shutter button was pressed fully.

•To avoid picture noise, we recommend decreasing maximum ISO sensitivity level or setting [COLOR MODE] to [NATURAL]. (P65)

>[SENSITIVITY]

For details on [REC] mode menu settings, refer to P19.

This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure enables pictures to be taken even in dark places without the resulting pictures coming out dark.

Applicable modes: ·

[AUTO]/[100]/[200]/[400]/[800]/[1600]

ISO sensitivity	100	1600
Recording location	When it is light (outdoors)	When it is dark
(recommended)
Shutter speed	Slow	Fast
Noise	Less	Increased

Note

•When setting to [AUTO], the ISO sensitivity is automatically adjusted to a maximum of [ISO400] according to the brightness. (It can be adjusted to a maximum of [ISO1000] when using the flash.)

•The sensitivity automatically switches to between [ISO1600] and [ISO6400] in [HIGH SENS.] in scene mode.

•The setting is not available when [INTELLIGENT ISO] is being used. ([ ] is displayed.)

•To avoid picture noise, we recommend that you either reduce the maximum ISO sensitivity level or set [COLOR MODE] to [NATURAL], and then take pictures. (P65)

VQT1M59 61