Reducing the time required for positioning
■Using a card reader/writer (commercially available)
Preparation: • Turn on the computer that is connected to a card reader/writer (commercially available) and close all other open application programs.
•Insert a memory card in the camera before starting the updating procedure.
Perform steps 
to 
of “Using “GPS Assist Tool” by connecting the camera and computer” (→142)
Use cursor button to select [SD card] and press [MENU/SET]
The “GPS Assist Tool” is copied to a memory card.
Turn off the camera and remove the memory card
Insert the memory card into a card reader/writer (commercially available) connected to the computer
Start up the “GPS Assist Tool” stored in the memory card on the computer and update the GPS assist data (→144)
Remove the memory card from the computer
Insert the memory card into the camera and turn on the camera
The GPS assist data of the camera is updated.