Panasonic DMCZS20K, DMC-ZS20, DMC-ZS19, M0112KZ0, VQT4B93 Burst function, Setting Speed Description

Burst function

Recording mode:

A burst of still pictures can be recorded while the shutter button is pressed fully.

Select [Burst] from the [Rec] menu (→51)

Use cursor button to select the burst setting, and press [MENU/SET]

Setting		Speed	Description	No. of
				pictures
	∗1	Approx. 2 - 10	• The burst speed is adjusted automatically in
			accordance with the movements of people, pets	100
		pictures/sec.	or other subjects. ([Intelligent Burst mode])
			• The subject is brought into focus as far as this
		Approx. 2	is allowed by the burst speed. The pictures are
		pictures/sec.	taken with the burst function while the exposure
			and White Balance are being adjusted.	100
			(However, when the burst function is operating
		Approx. 5	during motion picture recording, the focus is
			fixed to the first picture.)
		pictures/sec.	• The burst speed may be reduced under certain
			recording conditions.
		Approx. 10	• Focus, exposure and White Balance are fixed in	10
		pictures/sec.	the first picture.
			• Focus, exposure and White Balance are fixed in
		40 pictures/sec.	the first picture.	40

•Note on the picture size setting (→88)

•Focus, exposure and White Balance are fixed in

			60 pictures/sec.		the first picture.	60
					• The recordable range is reduced.
					• Note on the picture size setting (→88)
					• The burst of still pictures can be recorded even
			Complies with		in low light conditions as the flash is used.
					([Flash Burst])
		∗2		recording		5
				conditions	• The focus, exposure, and flash level are all
					fixed to the settings for the first picture.
					• Note on the picture size setting (→88)
	[OFF]			—	The burst function is released.	—
∗1 Only in the				mode
∗2 Only in the				, , mode

- 87 -