Panasonic WV-C L924A, WV-C L920A operating instructions Replacement of Auto Iris Lens Connector

Page 14

Replacement of Auto Iris Lens

Connector

If necessary, replace the existing lens connector with the type YFE419J100 supplied.

1.Cut the existing lens connector at the end of the iris control cable.

2. Process the cable end as shown in the figure.

8 mm (5/8)

2 mm (1/16)

3.Solder each wire to a pin as follows. Pin #1: Red/Power

Pin #2: Not used

Pin #3: White/Video

Pin #4: Black/GND, Shield

Pin 3

Rib

Pin 1

Pin 4

 

 

Pin 2

4.Attach the cover to the connector.

Cover

Lens

-14-

Image 14
Contents Operating Instructions Lightning flash with arrowhead Important Safety Instructions S3125A Contents Preface Features Handle the camera with care PrecautionsClean the CCD faceplate with care Never face the camera towards the sunMajor Operating Controls and Their Functions WV-CL924A1Gen-lock Termination Switch Hi-Z, G/L 75Ω Auto Iris Lens ConnectorFlange-back Adjusting Ring FB 2Gen-lock Input Connector GEN-LOCK6AC Inlet Socket 4Alarm Output Terminal Alarm OUT/GND5Day/Night Input Terminal DAY/NIGHT IN/GND 7AC/DC Compatible Input Terminal DC 12V IN/AC 24V IN, GNDWV-CL920A 120 V AC 60Hz Be pulled off the camera when the camera pans orConnections WV-CL924A 12 V DC/24 V ACAC Power Supply Recommended wire gauge sizes for 24 V AC lineReplacement of Auto Iris Lens Connector Mounting the Lens Focus or FLANGE-BACK Adjustment Installation of Camera Mounting from the topSetup Camera Setup MenuOpening the Setup Menu BlinkingSetup Operation Editing the CAM SET UP Menu Camera ID ON/OFF Setting ProceduresCamera Identification Camera ID Setting To edit the Camera IDTo determine the display position of the Camera ID Light Control Setting ALC/ELCTo erase all characters in the editing area ALC Mode with Preset on Back Light Compensation Back Light CompALC Mode with Preset OFF Blinking Compensating Flare Phenomenon Peak Mode Shutter Speed Setting ShutterGain Control Setting AGC ON/OFF Electronic Sensitivity Enhancement Sens UP Synchronization Setting Sync Rules on synchronizationInternal Sync Mode INT VBS Gen-lock Mode ExtvbsPage VS Gen-lock Mode Extvs Line-lock Sync Mode LLPhase Coarse ATW1 Auto Tracing White Balance White Balance Setting White BALAuto-Tracing White Balance Mode ATW Manual Fine Adjustment for AWC ATW Select AWC →Motion Detector Setting Motion DET Lens Drive Signal Selection Available Time second 2 s, 5 s, 10 s, 30 sSpecial Menu Special 10-6. BW To reset to the factory settings Burst BWSpecifications Prevention of Blooming and SmearAGC Standard Accessories Optional Accessories Panasonic Digital Communications & Security Company

WV-C L920A, WV-C L924A specifications

The Panasonic WV-C L924A and WV-C L920A are advanced surveillance cameras designed with cutting-edge technology to meet the demands of modern security applications. Both models offer exceptional performance in a wide range of environments, making them ideal choices for commercial and institutional use.

One of the standout features of the WV-C L924A and WV-C L920A is their high-resolution imaging capabilities. With the ability to capture video in full HD resolution, these cameras ensure clarity and detail in every frame. This is particularly important for identifying individuals or monitoring activities in critical areas. They are equipped with advanced image sensors that enhance low-light performance, allowing for crisp images even in challenging lighting conditions.

Both models incorporate Panasonic's Intelligent Dynamic Range (iDNR) technology, which minimizes the effects of high-contrast lighting situations. This ensures that both bright and dark areas are visible simultaneously, providing a balanced and detailed image. Additionally, these cameras support Wide Dynamic Range (WDR) functionality, further enhancing their ability to capture clear images in various lighting environments.

The WV-C L924A and WV-C L920A are equipped with motorized zoom lenses that enable operators to adjust the field of view remotely. This feature provides flexibility in surveillance setups, allowing for dynamic monitoring of different areas without the need for manual adjustments. Users can easily zoom in on specific subjects or areas of interest, improving the effectiveness of security operations.

In terms of connectivity, both cameras support various protocols and standards, including ONVIF compliance. This ensures seamless integration with a wide range of video management systems, enhancing their usability in diversified security networks. Their compatibility with IP networks allows for easy installation and management, giving users access to real-time monitoring and recording capabilities.

Durability is another key attribute of the WV-C L924A and WV-C L920A. Both models are designed to withstand harsh conditions, boasting robust housing that is dust-tight and water-resistant (IP66 rated). This makes them suitable for both indoor and outdoor applications, ensuring reliable performance regardless of environmental factors.

In summary, the Panasonic WV-C L924A and WV-C L920A offer a blend of high-resolution imaging, advanced dynamic range technology, flexible zoom capabilities, and robust connectivity options. Their durable design ensures they can operate effectively in various conditions, making them reliable choices for any security installation. Whether for monitoring a parking lot, office building, or retail environment, these cameras deliver the performance and features necessary to enhance safety and security.