Panasonic WV-C L920A, WV-C L924A operating instructions Mounting the Lens

Page 15

Mounting the Lens

Caution:

Before you mount the lens, loosen the fixing screw on the side of the camera, and rotate the flange- back adjusting ring counterclockwise until it stops. If the ring is not at the end, the inner glass or CCD image sensor may be damaged.

1.Mount the lens by turning it clockwise on the lens mount of the camera.

2.Connect the lens cable to the auto iris lens connec- tor on the side of the camera.

Screw

Flange-back

Adjusting Ring

Caution for Mounting the Lens

The lens mount should be a CS-mount (1”-32UN). In case of a C-mount, it should be a C-mount adapter and the lens weight should be less than 450 g (0.99 lbs). If the lens is heavier, both the lens and camera should be secured by using the supporter.

The protrusion at the rear of the lens should be as shown below:

CS-mount: Less than 4 mm (5/32”)

-15-

Image 15

Contents Operating Instructions Lightning flash with arrowhead Important Safety Instructions S3125A Contents Preface Features Never face the camera towards the sun PrecautionsClean the CCD faceplate with care Handle the camera with careWV-CL924A Major Operating Controls and Their Functions2Gen-lock Input Connector GEN-LOCK Auto Iris Lens ConnectorFlange-back Adjusting Ring FB 1Gen-lock Termination Switch Hi-Z, G/L 75Ω7AC/DC Compatible Input Terminal DC 12V IN/AC 24V IN, GND 4Alarm Output Terminal Alarm OUT/GND5Day/Night Input Terminal DAY/NIGHT IN/GND 6AC Inlet SocketWV-CL924A 12 V DC/24 V AC Be pulled off the camera when the camera pans orConnections WV-CL920A 120 V AC 60HzRecommended wire gauge sizes for 24 V AC line AC Power SupplyReplacement of Auto Iris Lens Connector Mounting the Lens Focus or FLANGE-BACK Adjustment Mounting from the top Installation of CameraCamera Setup Menu SetupBlinking Opening the Setup MenuSetup Operation Editing the CAM SET UP Menu To edit the Camera ID Setting ProceduresCamera Identification Camera ID Setting Camera ID ON/OFFLight Control Setting ALC/ELC To erase all characters in the editing areaTo determine the display position of the Camera ID Back Light Compensation Back Light Comp ALC Mode with Preset onALC Mode with Preset OFF Blinking Shutter Speed Setting Shutter Gain Control Setting AGC ON/OFFCompensating Flare Phenomenon Peak Mode Electronic Sensitivity Enhancement Sens UP Rules on synchronization Synchronization Setting SyncVBS Gen-lock Mode Extvbs Internal Sync Mode INTPage Line-lock Sync Mode LL VS Gen-lock Mode ExtvsPhase Coarse White Balance Setting White BAL Auto-Tracing White Balance Mode ATWATW1 Auto Tracing White Balance Select AWC → Manual Fine Adjustment for AWC ATWMotion Detector Setting Motion DET Available Time second 2 s, 5 s, 10 s, 30 s Lens Drive Signal SelectionSpecial Menu Special 10-6. BW Burst BW To reset to the factory settingsPrevention of Blooming and Smear SpecificationsAGC Standard Accessories Optional Accessories Panasonic Digital Communications & Security Company

WV-C L920A, WV-C L924A specifications

The Panasonic WV-C L924A and WV-C L920A are advanced surveillance cameras designed with cutting-edge technology to meet the demands of modern security applications. Both models offer exceptional performance in a wide range of environments, making them ideal choices for commercial and institutional use.

One of the standout features of the WV-C L924A and WV-C L920A is their high-resolution imaging capabilities. With the ability to capture video in full HD resolution, these cameras ensure clarity and detail in every frame. This is particularly important for identifying individuals or monitoring activities in critical areas. They are equipped with advanced image sensors that enhance low-light performance, allowing for crisp images even in challenging lighting conditions.

Both models incorporate Panasonic's Intelligent Dynamic Range (iDNR) technology, which minimizes the effects of high-contrast lighting situations. This ensures that both bright and dark areas are visible simultaneously, providing a balanced and detailed image. Additionally, these cameras support Wide Dynamic Range (WDR) functionality, further enhancing their ability to capture clear images in various lighting environments.

The WV-C L924A and WV-C L920A are equipped with motorized zoom lenses that enable operators to adjust the field of view remotely. This feature provides flexibility in surveillance setups, allowing for dynamic monitoring of different areas without the need for manual adjustments. Users can easily zoom in on specific subjects or areas of interest, improving the effectiveness of security operations.

In terms of connectivity, both cameras support various protocols and standards, including ONVIF compliance. This ensures seamless integration with a wide range of video management systems, enhancing their usability in diversified security networks. Their compatibility with IP networks allows for easy installation and management, giving users access to real-time monitoring and recording capabilities.

Durability is another key attribute of the WV-C L924A and WV-C L920A. Both models are designed to withstand harsh conditions, boasting robust housing that is dust-tight and water-resistant (IP66 rated). This makes them suitable for both indoor and outdoor applications, ensuring reliable performance regardless of environmental factors.

In summary, the Panasonic WV-C L924A and WV-C L920A offer a blend of high-resolution imaging, advanced dynamic range technology, flexible zoom capabilities, and robust connectivity options. Their durable design ensures they can operate effectively in various conditions, making them reliable choices for any security installation. Whether for monitoring a parking lot, office building, or retail environment, these cameras deliver the performance and features necessary to enhance safety and security.