Panasonic WV-C L924A, WV-C L920A operating instructions Motion Detector Setting Motion DET

Page 36

5.Press L or M to obtain the optimum amount of blue gain.

Note: When you need to set MASK SET, re-adjust to obtain the optimum amount of red and blue gain.

8. Motion Detector Setting (MOTION DET)

The motion detector detects the moving objects in the scene by monitoring changes in brightness level. You can select the level of sensitivity for motion detection.

When this camera is connected to a compatible intelli- gent CCTV system, the camera transmits an alarm sig- nal by multiplexing it with the video signal.

1.Move the cursor to the MOTION DET parameter and select ON.

2.Press I. The MOTION DETECT menu appears on the monitor screen.

3.Move the cursor to MASK SET and press I. MASK SET lets you set 48 mask areas. To set MASK SET, proceed as described in steps 2 to 4 of “ALC mode with PRESET OFF” (See page 26 and 27).

4.Move the cursor to the ALARM parameter and select ON or OFF to set the alarm for DISPLAY MODE.

Note: When the system controller WV-RM70, WV- CU550 series, WV-CU161 or WV-CU360 is used with this model, select OFF for ALARM.

5.Move the cursor to DISPLAY MODE and press I to see the current setting. The masks that detect the brightness changes start blinking.

6.To raise detection sensitivity, press I to return to the MOTION DETECT menu.

7.To obtain the optimum detection level, move the “I” cursor.

8.Repeat the procedures above to obtain a satisfac- tory setting.

** CAM SET UP **

CAMERA ID

OFF

ALC/ELC

 

ALC

SHUTTER

 

OFF

 

AGC

 

ON(DNR-H)

SENS UP

 

OFF

 

SYNC

 

INT

 

WHITE BAL

ATW1

MOTION DET

ON

 

LENS DRIVE

DC

 

 

END

SET UP ENABLE

** MOTION DETECT **

LEVEL

....I....

 

 

-

+

DWELL TIME

2S

 

DISPLAY MODE

 

 

ALARM

OFF

 

MASK

SET

 

 

RET

END

 

 

The camera will deactivate the detector for a few minutes after the power of the camera is turned on or the BW setting in the Special Menu is set to other than OFF.

-37-

Image 36
Contents Operating Instructions Lightning flash with arrowhead Important Safety Instructions S3125A Contents Preface Features Precautions Clean the CCD faceplate with careHandle the camera with care Never face the camera towards the sunMajor Operating Controls and Their Functions WV-CL924AAuto Iris Lens Connector Flange-back Adjusting Ring FB1Gen-lock Termination Switch Hi-Z, G/L 75Ω 2Gen-lock Input Connector GEN-LOCK4Alarm Output Terminal Alarm OUT/GND 5Day/Night Input Terminal DAY/NIGHT IN/GND6AC Inlet Socket 7AC/DC Compatible Input Terminal DC 12V IN/AC 24V IN, GNDBe pulled off the camera when the camera pans or ConnectionsWV-CL920A 120 V AC 60Hz WV-CL924A 12 V DC/24 V ACAC Power Supply Recommended wire gauge sizes for 24 V AC lineReplacement of Auto Iris Lens Connector Mounting the Lens Focus or FLANGE-BACK Adjustment Installation of Camera Mounting from the topSetup Camera Setup MenuOpening the Setup Menu BlinkingSetup Operation Editing the CAM SET UP Menu Setting Procedures Camera Identification Camera ID SettingCamera ID ON/OFF To edit the Camera IDLight Control Setting ALC/ELC To erase all characters in the editing areaTo determine the display position of the Camera ID ALC Mode with Preset on Back Light Compensation Back Light CompALC Mode with Preset OFF Blinking Shutter Speed Setting Shutter Gain Control Setting AGC ON/OFFCompensating Flare Phenomenon Peak Mode Electronic Sensitivity Enhancement Sens UP Synchronization Setting Sync Rules on synchronizationInternal Sync Mode INT VBS Gen-lock Mode ExtvbsPage VS Gen-lock Mode Extvs Line-lock Sync Mode LLPhase Coarse White Balance Setting White BAL Auto-Tracing White Balance Mode ATWATW1 Auto Tracing White Balance Manual Fine Adjustment for AWC ATW Select AWC →Motion Detector Setting Motion DET Lens Drive Signal Selection Available Time second 2 s, 5 s, 10 s, 30 sSpecial Menu Special 10-6. BW To reset to the factory settings Burst BWSpecifications Prevention of Blooming and SmearAGC Standard Accessories Optional Accessories Panasonic Digital Communications & Security Company

WV-C L920A, WV-C L924A specifications

The Panasonic WV-C L924A and WV-C L920A are advanced surveillance cameras designed with cutting-edge technology to meet the demands of modern security applications. Both models offer exceptional performance in a wide range of environments, making them ideal choices for commercial and institutional use.

One of the standout features of the WV-C L924A and WV-C L920A is their high-resolution imaging capabilities. With the ability to capture video in full HD resolution, these cameras ensure clarity and detail in every frame. This is particularly important for identifying individuals or monitoring activities in critical areas. They are equipped with advanced image sensors that enhance low-light performance, allowing for crisp images even in challenging lighting conditions.

Both models incorporate Panasonic's Intelligent Dynamic Range (iDNR) technology, which minimizes the effects of high-contrast lighting situations. This ensures that both bright and dark areas are visible simultaneously, providing a balanced and detailed image. Additionally, these cameras support Wide Dynamic Range (WDR) functionality, further enhancing their ability to capture clear images in various lighting environments.

The WV-C L924A and WV-C L920A are equipped with motorized zoom lenses that enable operators to adjust the field of view remotely. This feature provides flexibility in surveillance setups, allowing for dynamic monitoring of different areas without the need for manual adjustments. Users can easily zoom in on specific subjects or areas of interest, improving the effectiveness of security operations.

In terms of connectivity, both cameras support various protocols and standards, including ONVIF compliance. This ensures seamless integration with a wide range of video management systems, enhancing their usability in diversified security networks. Their compatibility with IP networks allows for easy installation and management, giving users access to real-time monitoring and recording capabilities.

Durability is another key attribute of the WV-C L924A and WV-C L920A. Both models are designed to withstand harsh conditions, boasting robust housing that is dust-tight and water-resistant (IP66 rated). This makes them suitable for both indoor and outdoor applications, ensuring reliable performance regardless of environmental factors.

In summary, the Panasonic WV-C L924A and WV-C L920A offer a blend of high-resolution imaging, advanced dynamic range technology, flexible zoom capabilities, and robust connectivity options. Their durable design ensures they can operate effectively in various conditions, making them reliable choices for any security installation. Whether for monitoring a parking lot, office building, or retail environment, these cameras deliver the performance and features necessary to enhance safety and security.