Panasonic KX-TGA593AL Registering the cordless camera, Deregistering the cordless camera

Page 13

Preparation

Registering the cordless camera

Register the cordless camera to a KX- TG5961AL/KX-TG5971AL/KX-TG5976AL base unit.

1 Base unit:

Press and hold {INTERCOM} until the IN USE indicator flashes.

LAfter the IN USE indicator starts flashing, the rest of the procedure must be completed within 90 seconds.

2 Cordless camera:

Press PROG. (programme) on the back side of the cordless camera with a pointed object such as a pen until a beep sounds.

LWhen registration is completed successfully, the cordless camera beeps and the indicator stops flashing red but remains lit in yellow- green (page 8).

Deregistering the cordless camera

The base unit can cancel the registration of a registered cordless camera.

Important:

LBefore deregistering, confirm the cordless camera’s extension number from the handset (colour display models only: KX-TGA591AL).

Press {INTERCOM} on the handset to display its extension.

Base unit

1 Press and hold {INTERCOM} until the IN USE indicator flashes.

2 Press and hold the cordless camera's extension number ({1} – {8}) until a beep sounds.

Note:

LThe indicator colour on the camera remains the same.

13

Image 13
Contents Model No. KX-TGA593AL Introduction Camera monitoring using the colour display handset Feature highlightIntroduction Included accessories Accessory informationInstallation Important safety instructionsMedical Avoiding noise For best performanceEnvironment Routine careConditions for using the cordless camera Controls Understanding the cordless camera indicatorStatus Description Connecting the AC adaptor and the call button Setting up the cordless cameraAdjusting the cordless camera lens angle DIP switch Function On default OFF *1 Setting the DIP switchesDisplaying the image upside down DIP switch Selecting the cordless camera speaker volume DIP switchSymbol Meaning Symbols used in these operating instructionsExample Deregistering the cordless camera Registering the cordless cameraBase unit Cordless cameraTalking to the paged party using the cordless camera Adjusting receiver/speaker volumeMonitoring the cordless camera from a handset HandsetPaging the handsets from the cordless camera Paging using the cordless camera audio sensorAdjusting the display brightness Useful settings while camera monitoringSelecting image zoom Save Setting the audio detection sensitivityWall mounting Connecting the wall-mounting adaptorStandard mounting Mounting the cordless camera on the wall50.8 mm Upside down mountingAbout the screws for wall mounting Removing the wall-mounting adaptorWall mount template for the cordless camera Problem Cause & solution TroubleshootingUseful Information Specifications Index Page Page Page Manufacturer Sales Department Panasonic Australia Pty. LimitedCopyright