Panasonic KX-TGA593AL operating instructions Troubleshooting, Problem Cause & solution

Page 21

 

Useful Information

 

 

 

 

Troubleshooting

 

 

 

Problem

Cause & solution

The cordless camera

LCheck the connections (page 9).

does not work.

LThe cordless camera is not registered to the base unit.

 

Register the cordless camera to the base unit (page

 

13).

 

 

The cordless camera’s

LThe cordless camera is not registered to the base unit.

indicator is flashing red.

Register the cordless camera to the base unit (page

 

13).

 

LThe cordless camera is out of range. Locate the

 

cordless camera near the base unit.

 

 

The image is faint.

LThe camera lens is dirty. Clean it with a soft dry cloth.

 

LDo not touch the lens directly. Fingerprint may cause an

 

unclear image.

 

 

The image sent from the

LAdjust the display brightness setting (page 16).

cordless camera is poor

LSelect standard quality mode instead of enhanced

on the handset display.

motion mode (page 11).

 

LThe place where the cordless camera is located is dark.

 

Improve lighting.

 

 

The image sent from the

LAdjust the display brightness setting (page 16).

cordless camera is dark

LThere is a strong sunlight or a backlight in the place

and difficult to see on the

where the cordless camera is located. Try shading the

handset display.

camera’s location.

 

 

I cannot connect to the

LThe cordless camera has lost communications with the

cordless camera, the

base unit. Move the cordless camera closer to the base

image distorts, or the

unit, and try again.

image is slow.

LThere is an obstacle such as concrete wall. Move the

 

cordless camera to the place without an obstacle.

 

LA microwave appliance is in use. Move the cordless

 

camera closer to the base unit or use the cordless

 

camera away from that appliance, and try again.

 

 

The camera sensor does

LIf you set the audio detection sensitivity to off, the

not respond.

camera sensor does not respond. Turn this feature on

 

(page 17).

 

LWhile a handset is monitoring the cordless camera, the

 

cordless camera stops detecting sound.

 

 

21

Image 21
Contents Model No. KX-TGA593AL Introduction Feature highlight Camera monitoring using the colour display handsetIntroduction Included accessories Accessory informationImportant safety instructions InstallationMedical Avoiding noise For best performanceEnvironment Routine careConditions for using the cordless camera Understanding the cordless camera indicator ControlsStatus Description Connecting the AC adaptor and the call button Setting up the cordless cameraAdjusting the cordless camera lens angle DIP switch Function On default OFF *1 Setting the DIP switchesDisplaying the image upside down DIP switch Selecting the cordless camera speaker volume DIP switchSymbols used in these operating instructions Symbol MeaningExample Deregistering the cordless camera Registering the cordless cameraBase unit Cordless cameraTalking to the paged party using the cordless camera Adjusting receiver/speaker volumeMonitoring the cordless camera from a handset HandsetPaging the handsets from the cordless camera Paging using the cordless camera audio sensorUseful settings while camera monitoring Adjusting the display brightnessSelecting image zoom Save Setting the audio detection sensitivityWall mounting Connecting the wall-mounting adaptorStandard mounting Mounting the cordless camera on the wall50.8 mm Upside down mountingRemoving the wall-mounting adaptor About the screws for wall mountingWall mount template for the cordless camera Problem Cause & solution TroubleshootingUseful Information Specifications Index Page Page Page Sales Department Panasonic Australia Pty. Limited ManufacturerCopyright