Panasonic KX-TGA593AL Mounting the cordless camera on the wall, Standard mounting, 50.8 mm

Page 19

Useful Information

Mounting the cordless camera on the wall

Standard mounting

1 Drive the screws (not included) into the wall at a recommended height of 1.8 m or below using the wall mount template as a guide (page 20).

2 Mount the cordless camera (A), then slide it down (B) and to the right (C) until it is secure.

LTo aim the camera lens, see page 10.

50.8 mm

A

 

B

C

Screws

(230–240 V AC, 50/60 Hz)

Upside down mounting

LThe image may be seen upside down when mounting upside down. To compensate for this, change the cordless camera setting to display images upside down (page 11).

1 Drive the screws (not included) into the wall at a recommended height of 1.8 m or below using the wall mount template as a guide (page 20).

2 Mount the cordless camera (A), then slide it down (B) and to the left (C) until it is secure.

50.8 mm

A

 

B

C

Screws

(230–240 V AC,

50/60 Hz)

19

Image 19
Contents Model No. KX-TGA593AL Introduction Camera monitoring using the colour display handset Feature highlightIntroduction Included accessories Accessory informationInstallation Important safety instructionsMedical Routine care For best performanceAvoiding noise EnvironmentConditions for using the cordless camera Controls Understanding the cordless camera indicatorStatus Description Connecting the AC adaptor and the call button Setting up the cordless cameraAdjusting the cordless camera lens angle Selecting the cordless camera speaker volume DIP switch Setting the DIP switchesDIP switch Function On default OFF *1 Displaying the image upside down DIP switchSymbol Meaning Symbols used in these operating instructionsExample Cordless camera Registering the cordless cameraDeregistering the cordless camera Base unitHandset Adjusting receiver/speaker volumeTalking to the paged party using the cordless camera Monitoring the cordless camera from a handsetPaging the handsets from the cordless camera Paging using the cordless camera audio sensorAdjusting the display brightness Useful settings while camera monitoringSelecting image zoom Save Setting the audio detection sensitivityWall mounting Connecting the wall-mounting adaptorUpside down mounting Mounting the cordless camera on the wallStandard mounting 50.8 mmAbout the screws for wall mounting Removing the wall-mounting adaptorWall mount template for the cordless camera Problem Cause & solution TroubleshootingUseful Information Specifications Index Page Page Page Manufacturer Sales Department Panasonic Australia Pty. LimitedCopyright