Panasonic KX-TGA593AL operating instructions Wall mounting, Connecting the wall-mounting adaptor

Page 18

Useful Information

Wall mounting

The cordless camera can be mounted by the standard mounting or upside down mounting.

CAUTION:

LMount the cordless camera on the stable location where the unit can be adequately supported when installing.

LThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

LDo not mount the cordless camera on a soft material. It may fall down, break or cause injury.

LDo not mount the cordless camera on the following places: plaster board, ALC (autoclaved lightweight cellular concrete), concrete block, plywood less than 25 mm thick, and etc.

LDo not pull the call button wire after you mount the cordless camera on the wall.

LAfter mounting the cordless camera on the wall, speak loudly and clearly into the MIC when talking with the handset user.

Connecting the wall-mounting adaptor

ASlide the cordless camera into the wall-mounting adaptor in the direction of the arrow until it clicks into the place.

BTuck the call button wire into the hole on the side of the wall-mounting adaptor by plugging the small wire fixture into the hole.

CTurning it slightly and sliding it in place.

DFasten the call button wire to the hook of the wall-mounting adaptor.

18

Image 18

Contents Model No. KX-TGA593AL Introduction Feature highlight Camera monitoring using the colour display handsetIntroduction Accessory information Included accessoriesImportant safety instructions InstallationMedical Environment For best performanceAvoiding noise Routine careConditions for using the cordless camera Understanding the cordless camera indicator ControlsStatus Description Setting up the cordless camera Connecting the AC adaptor and the call buttonAdjusting the cordless camera lens angle Displaying the image upside down DIP switch Setting the DIP switchesDIP switch Function On default OFF *1 Selecting the cordless camera speaker volume DIP switchSymbols used in these operating instructions Symbol MeaningExample Base unit Registering the cordless cameraDeregistering the cordless camera Cordless cameraMonitoring the cordless camera from a handset Adjusting receiver/speaker volumeTalking to the paged party using the cordless camera HandsetPaging using the cordless camera audio sensor Paging the handsets from the cordless cameraUseful settings while camera monitoring Adjusting the display brightnessSelecting image zoom Setting the audio detection sensitivity SaveConnecting the wall-mounting adaptor Wall mounting50.8 mm Mounting the cordless camera on the wallStandard mounting Upside down mountingRemoving the wall-mounting adaptor About the screws for wall mountingWall mount template for the cordless camera Troubleshooting Problem Cause & solutionUseful Information Specifications Index Page Page Page Sales Department Panasonic Australia Pty. Limited ManufacturerCopyright