Panasonic BM-ET300AE Installation Space and Recognition Range, Keep the Installation Space

0 mm {0 in.}

Keep the iris camera away in the following, in addition to the above surroundings.

•Vibration (It may cause invalid iris image capturing and recognition. It may also cause other trouble or damage.)

•Places whose humidity is not between 30 % and 80 % and whose temperature is not between 0 °C and 40 °C {between 32 °F and 104 °F}.

If the camera is located in an area exceeding these ranges, it may cause damage or a malfunction.

•Noise (for example, places near air conditioners or ventilators)

•Electricity

■Installation Space and Recognition Range

●Keep the Installation Space.

The installation space described in the following illustrations is required.

Note: The height of the iris camera, shown in the figure, is a recommendation. The centre of the optical axis and upside/down- side limit of the eye position will differ depending on the installation height.

Top View

Keep this area free from obstructions

400 mm {16 in.} 700 mm {28 in.}

1 100 mm {43 in.}

400 mm {16 in.} 400 mm {16 in.}

Side View

	Keep this area free
camerairistheofHeight in.}{51mm3001or more (recommended)	from obstructions
	400 mm {16 in.}	700 mm {28 in.}
	1 100 mm {43 in.}

Floor

700 mm {28 in.} 700 mm {28 in.}

●Check the Capturing Range.

If the height of the iris camera is 1 300 mm {54.3 in.} as described in the previous "Side View" illustration, the recognition range will become as follows.

Note: If your eye position is higher than the upside limit, bend down. If your eye position is lower than the down- side limit, get on a pedestal, etc.

	1 710 mm
	{67.3 in.}
Side View	Upside limit of
	the eye position
35°	1 480 mm {58.3 in.}
—15°	Center of optical axis
	(Recommended
	installation height)
	1 380 mm
	{54.3 in.}
	Downside limit of
	the eye position
300 mm {12 in.}	400 mm {15.7 in.}

1 300 mm {54.3 in.} 11 mm {0.43 in.}

Bottom of

the camera unit

17