Panasonic BM-ET300AE Precautions, General Safety Requirement, To avoid fire or personal injury

Page 9
0 °C to 40 °C {32 °F to 104 °F}
30 % to 80 % relative humidity, non- condensing
12 V DC/24 V AC

PRECAUTIONS

General Safety Requirement

For Installation:

Refer all work related to the installation of the product to qualified service personnel or system installers.

Consult an expert for help in evaluating load bearing capacity of the installation surface and structure. If the sur- face is not strong enough, the camera may fall down. Refer to the product specifications for weights.

To avoid fire or personal injury:

•Do not drop metallic parts through slots. This could permanently damage the product.

•Do not attempt to disassemble the product.

There are no user-serviceable parts inside. Panasonic is not responsible for regulatory compliance of a disas- sembled Panasonic product by unauthorized person- nel. Contact qualified service personnel for mainte- nance.

•Do not strike or shake the product.

Handle the appliance with care, or it could cause the trouble of it.

•Do not expose nor operate the product in wet/damp conditions.

Take immediate action if the product gets wet. Refer servicing to qualified service personnel. Moisture could damage the product and also cause electric shocks.

•Do not use strong or abrasive detergents when cleaning the product.

Use soft and dry cloth to clean the product when it is dirty. When the dirt is hard to remove, use a mild deter- gent and wipe gently.

•Do not use the product beyond operating requirements.

It is designed to operate properly for environment spec-

ified below: Temperature Humidity

Source voltage

Important notes specific to the product:

•This unit has no power switch.

Power is supplied from an external 12 V DC/24 V AC power-supply device. Refer to service personnel for how to turn on/off the power.

Note: While the power is turned off, recognition and entrance will NOT be available.

•The third-party external power supply should meet the specifications. (Refer to p. 33.)

•Replacement part

Exchange the following parts for the same type. F1: K5D402BK0002

•Adopting tamper-proof structure.

Refer to service personnel for relocating or servicing the unit.

As the unit has been designed in tamper-proof struc- ture, buzzer sound will be activated with alarm notifica- tion when you try to open the front cover or detach the camera from the wall. Then, recognition will become unavailable, the alarm notification will also be sent to the iris server, and the stored data may be erased from the unit.

•Use of near-infrared ray

Near-infrared ray is used when iris data are captured by the unit. The near-infrared ray is compliant with the radiological safety standard of IEC60825-1.

•Indication label

Refer to the indication placed on the bottom of the product as to the indications of equipment classification and power source, etc.

•This product is not designed to prevent theft.

The product is designed to perform roles of capturing personal iris data, of recognizing individuals and of pro- ducing output signals only. To ensure your entrance/gate security, you must use the product together with other security system or devices including electric locks.

Panasonic is NOT RESPONSIBLE FOR ANY CRIME OR TROUBLE CAUSED BY USING THIS UNIT.

•In some cases, recognition or enrollment doesn’t work properly.

It could be invalid in recognition or enrollment when the camera has difficulty in getting iris information due to dirt in front of lens, reflection of glasses or insufficiency of physical requirement.

•Iris data is a nature of privacy.

Take enough care not to leak the data out of the iris server. It is also recommended that you should get an agreement from a person to register his or her data.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operating Instructions BM-ET300AE Important Safety Instructions Contents As a recognition camera for iris recognition PrefaceAccess control system can be composed FeaturesSupporting a common access control interface Built-in video surveillance cameraNotification about this Document TrademarksLimitation of Liability Document Convention Precautions General Safety RequirementTo avoid fire or personal injury Camera settings are configured by the iris server Front View External ViewRear View Rear tamper detection switchInternal View Mounting hook holeConnection terminal Specifications of Wiegand Connectors for Card Reader Specifications of Alarm Output ConnectorsDescription about the Connection Example Installation and ConnectionsPreparation Notification about the Installation SitePreparing the Necessary Items Cable PreparationInstallation Space and Recognition Range Keep the Installation SpaceCheck the Capturing Range Wall InstallationCables If you are wearing contact lenses Instructions for Proper Enrollment and RecognitionHow to Position Your Eyes in the Mirror Stand where you can see the iris camera from the front sideYes Make sure that you can see both eyes in the mirror Hold the tilt handles at the sides of the front panelIf You Have Difficulty in Eye Positioning If You are Wearing an Eyepatch, etcCases of Enrollment/Recognition Failure Stand Sit down in front of the iris camera How to Carry out EnrollmentIf you are wearing glasses/sunglasses, take them off Start iris image capturingPage Recognition by an Iris Camera only How to Carry out RecognitionMove your face so as your eyes are positioned within 50 cm 64 ft. from the iris cameraDuring capturing, open your eyes widely Recognition by an Iris Camera and a Card Reader Pass a card through the card readerVoice guidance Rejectaccept When Enrollment/Recognition Becomes Invalid TroubleshootingCases of Enrollment/Recognition Failure Before Requesting for RepairProblem Check item Remedy General SpecificationsInput/Output FunctionStandard Accessories Osaka, Japan

BM-ET300AE specifications

The Panasonic BM-ET300AE is a sophisticated and versatile laser printer that is designed to cater to various printing needs in both home and office environments. With its cutting-edge features and robust performance, it stands out as a reliable choice for individuals and businesses looking for high-quality printing solutions.

One of the key characteristics of the BM-ET300AE is its impressive print resolution. It offers a maximum resolution of up to 4800 x 1200 dpi, ensuring that documents and images are rendered with exceptional clarity and detail. This high-resolution output is particularly appealing for print jobs that require fine text and intricate graphics.

The printer employs advanced laser technology, which not only speeds up the printing process but also enhances the overall quality of prints. With a print speed of up to 24 pages per minute for black and white documents and around 22 pages per minute for color prints, the BM-ET300AE is built to accommodate high-volume printing tasks efficiently.

Connectivity is another strong suit of the BM-ET300AE. It supports multiple connectivity options, including USB, Ethernet, and wireless printing, allowing users to print from various devices such as laptops, smartphones, and tablets. The built-in Wi-Fi feature is particularly convenient, enabling users to print documents directly from their mobile devices without the need for a wired connection.

User-friendliness is also a significant aspect of the BM-ET300AE. Equipped with a straightforward control panel and an intuitive display, it makes navigation and operation easy for users of all technical skill levels. Additionally, the printer is designed for low maintenance, with features like an automatic duplex printing function, which helps save paper and reduce overall printing costs.

Moreover, the BM-ET300AE employs energy-efficient technologies, contributing to lower energy consumption while maintaining optimal performance. This makes it an environmentally friendly choice for users who are conscious of their ecological footprint.

In summary, the Panasonic BM-ET300AE is a feature-rich laser printer that excels in print quality, speed, and connectivity. Its advanced technologies, ease of use, and energy efficiency make it an excellent option for both personal and professional printing needs. Whether for basic document printing or high-quality graphic output, the BM-ET300AE delivers on multiple fronts, making it a valuable addition to any workspace.
Top Page Image Contents