
Operating Instructions
| Setting | Description |
|
|
|
• | IP address | • If your ISP or network administrator specifies the IP |
• | Subnet Mask | address and subnet mask, enter them in each data field. |
(Static Only) | • If you use the camera on the LAN, set the IP address in the | |
|
| same subnet mask as your PC (see page 103). |
|
| • Set 4 digits |
|
| "192.168.0.253". But "0.0.0.0" and "255.255.255.255" are |
|
| not available. |
|
| |
Host Name | • If your ISP uses the DHCP function which automatically | |
(DHCP Only) | assigns the IP address to the camera, enter the ISP- | |
|
| assigned host name. (Host name may be used as an |
|
| authentication.) |
|
| • Enter ASCII characters for the host name (see page 111). |
|
| But [Space], ["], ['], [&], [<] and [>] are not available. |
|
| |
Default Gateway*1 | • If you have the assigned Default Gateway address by your | |
(Static/DHCP Only) | ISP or network administrator, enter it in this data field. | |
|
| • Set 4 digits |
|
| "192.168.0.253". But "0.0.0.0" and "255.255.255.255" are |
|
| not available. |
|
| |
DNS Server | • DNS server address is required in the following conditions. | |
Address*1 | • Transferring camera images by | |
(Static/DHCP Only) | • Setting cameras by their host names on the Multi- | |
|
| Camera Setup page |
|
| • Using the Viewnetcam.com service |
|
| • If you have the assigned DNS server addresses by your |
|
| ISP or network administrator, enter them in this data field. |
|
| They usually have two addresses. |
|
| • Set 4 digits |
|
| "192.168.0.253". But "0.0.0.0" and "255.255.255.255" are |
|
| not available. |
|
|
|
34