Panasonic BL-C30 Name by E-mail or FTP transfer uses only 24 h format, Check the box to enable it

Page 44

Operating Instructions

Setting	Description

Time Setting	• Select date and format (AM/PM or 24 H). These settings
	are used for image buffer/transfer, operation time and time
	stamps on the buffered image. But E-mail subject and file
	name by E-mail or FTP transfer uses only 24 h format.

Automatic Time	• NTP (Network Time Protocol) server synchronizes the
Adjustment	camera's internal clock. It adjusts automatically every day.
	Check the box to enable it.
	• Set the NTP server IP address, set 4 digits (0—255) and 3
	periods such as "192.168.0.253". But "0.0.0.0" and
	"255.255.255.255" are not available. Or set a host name
	(1—255 characters).
	• Select your time zone.

	Note
	The camera will not synchronize to the NTP server if the
	time setting from the NTP server moves forward or
	backward more than 1 hour at a time. This is to protect the
	camera's time setting from fraudulent NTP server
	tampering, incorrect time information, etc.

Adjust Clock for	• During the daylight saving time, the internal clock is turned
Daylight Saving	forward an hour. The clock will shift one hour forward at the
Time	set time on the Start Day, and move back one hour at the
	set time on the End Day. Check the box to enable it.

Note

An "s" is put between date and time of time stamp when enabling this feature. The time stamp will be attached to the transferred images by the Image Transfer feature.

3.Click [Save] when finished.

•New settings are saved.

•When finished, "Success!" is displayed.

4.Click [Go to Date and Time page].

•The Date and Time page is displayed.

Note

Date and time settings become incorrect depending on the length of power-on time or the internal temperature. Using the Automatic Time Adjustment is recommended.

44

Image 44

Contents Operating Instructions Network CameraPrivacy Monitoring Purpose Privacy mode Protecting privacyMonitoring Off Remote monitoringEasy installation using UPnPTM Universal Plug and Play Description OperatingSystem ProtocolImportant Safety Instructions Table of Contents Camera Maintenance IndexAccessing the Camera Start up the web browser on your PCClick the following tabs to display each C D E FViewing Single Camera Capture Image Click to Center ButtonSee Operation Bar Camera ImageSecurity Warning window Security Warning window on Microsoft Windows XP Service Pack Banner Image Auto Centering Click to Center Capturing a Still Image Using Operation Bar Pan/Tilt Operation Pan/Tilt RangeSetting Home Position/Sensor Position/Preset Button Registering Home Position/Sensor PositionRegistering a Preset Button Only an administrator can register preset buttonsViewing the Image Changing or Deleting the Settings Viewing Multi-Camera Capture Image Button SeeWhen the image is not displayed on the Multi-Camera How to save a still image to your PCStill image can be saved using the capture image button see On the Single Camera or Multi-CameraViewing Buffered Image Deleting Buffered Images PlayPrev or Next 10 orViewing Still Images on Your Mobile Phone Stopping E-mail Transfer by the Mobile Phone Operation Using Camera Features Access the camera see Top page is displayedWireless Account Administrator*1Basic Network UPnPControl IndicatorPrivacy Mode Enables privacy mode see Connecting the Camera to Your Network Automatic SetupDhcp Setup Static Setup Setting Description They usually have two addresses Not displayed. in the Installation/Troubleshooting On the image quality or how bright the object is160 x 120 pixels About 3 KB 24 Kbit 320 x 240 pixels About 10 KB 80 KbitUsing Wireless LAN One or all of the four keys can be set. Check the same Selecting WEP at Cipher enables you to set WEPKey1Set each parameter for the Encryption Bottom Operating Instructions Using UPnP Universal Plug and Play If the network setting is Automatic Setup, enable AllowAccess from the Internet on the Network page see InternetSetting Description Confirming the Internet access Setting Date and Time Check the box to enable it Time setting from the NTP server moves forward orCameras time setting from fraudulent NTP server Name by E-mail or FTP transfer uses only 24 h formatChanging Camera Settings Position and preset buttons Home Position *2Maximum Values must be selected as minimum home position maximumSetting Description Specifying Pan/Tilt Range Operating Instructions Users must enter the user name and password Administrator/General Users/Guest Users Items Administrator General Users Guest UsersPassword Number of Users Accessible Pages Access LevelLogging in to the Camera Access from guest users From guest users Creating, Modifying or Deleting General UsersSetting Description Operating Instructions Or Japanese. The selected language is displayed as Initial language on the Top, Single Camera, MultiCamera and Buffered Image pages. If you select Support pages are displayed only in EnglishOperating Instructions Configuring Multiple Cameras Setting Description Buffering or Transferring Images by Timer Option and set the time period Setting Description Camera transfers the image to an FTP server see Mail Camera transfers the image by E-mail seeWhen you set FTP for Transfer Method When you set E-mail for Transfer Method Time in 24h mode is attached on the subject Is inserted after the day when referring to a summer timeCharacter and 0-22 characters for a 2-byte character ZoneOperating Instructions Buffering or Transferring Images by Sensor Option and set the time period Setting Description Quality or what object you view Many E-mails to a mobile phone FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Subject 20050101093020500 Underlined numbers are Time in 24h mode is attached on the subject. E.gInserted after the day when referring to a summer time Seconds Minute 1st 2nd 3rd 4th 5th 6th Specifying Operation Time About Operation Time Operation TimeChanging Indicator Display Enabling Privacy Mode Privacy ModePrivacy Button Front of the cameraMaintenance Maintenance StatusWireless Status Displays wireless information see DefaultConfirming the Wireless Status Confirming the StatusRestarting the Camera Updating the Camera Firmware Operating Instructions Confirm that the version number on the Top page is updated Creating Configuration File Loading Settings from a Configuration File Resetting the Camera to Factory Default Wireless Help Displays the Wireless Help page see SupportSeeing Help Support HelpSeeing Support Information Seeing Wireless HelpSeeing Product Information Factory Default Reset Button Camera has a Factory Default Reset button on the bottomBasic Default Setting ListItems Default Required Wireless Communication mode Speed Auto Encryption WEP AuthenticationMy Network Places Viewnet Enable Cam.com Date Time SettingCamera Camera Name 50-+50 degreesHome Position Tilt Range MinimumAdministrator Authentication AccountSecurity General RetypeAdvanced Multi Multi-Camera Blank Display IP Address or Host BlankIP address*1 NameImage Resolution Mode Privacy ModeBuffer Status Off Transfer Trigger Active Time of Trigger Always Lens Position WhenPreset Buttons PresetButtons Preset 101Cleaning Cleaning the Main UnitCleaning the Lens Clean the camera after the camera is turned offSetting an IP Address on Your PC Local IP AddressSteps Class Subnet Mask Local IP AddressUsing Setup Program Finding the cameraAutomatic Setup Local or Internet Access or Manual Setup Manual Setup window How to Set the Proxy Server Settings Setting Your PCSetting the Proxy Server Settings on Web Browser Operating Instructions Operating Instructions Setting the Internet Temporary File Setting on Web Browser Windows XP Start SettingsWindows Setup tab Select Communication Detail Add or RemoveAscii Character Table 111File Size and Number of Buffered Images 113 Network Camera Items SpecificationsOther Specifications Items Wireless Specifications Items OfdmIndex 115116 ActiveX ControlsSystem Requirements for your PC Update Firmware UPnP Web Browser Wireless Wireless Help 117 Copyright