Panasonic BL-C30 operating instructions Description, Operating, System, Protocol

Page 4

Operating Instructions

System Requirements for your PC

Your PC (Personal Computer) and network must meet the following technical specifications for the camera to work properly.

Item

Description

 

 

Operating

Microsoft® Windows® XP, Microsoft® Windows® 2000

System

Microsoft® Windows® Me, Microsoft® Windows® 98SE

 

 

CPU

Pentium® III (500 MHz or greater is recommended.)

 

 

Protocol

TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)

 

 

Interface

10/100 Mbps network interface installed

 

 

Web Browser

Internet Explorer 6.0 or later (Not included on the Setup CD-

 

ROM)

 

 

Note

See Panasonic Network Camera support website at http://panasonic.co.jp/pcc/products/en/netwkcam/ for the latest information about web browser.

Trademarks

Adobe, Acrobat and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

Microsoft, Windows, Hotmail and ActiveX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Pentium is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries.

Screen shots reprinted with permission from Microsoft Corporation.

All other trademarks identified herein are the property of their respective owners.

Abbreviations

UPnP is the abbreviation for "Universal Plug and Play".

"Network Camera" is called "Camera" in this Operating Instructions.

4

Image 4
Contents Operating Instructions Network CameraPrivacy Monitoring Purpose Privacy mode Protecting privacyMonitoring Off Remote monitoringEasy installation using UPnPTM Universal Plug and Play Description OperatingSystem ProtocolImportant Safety Instructions Table of Contents Camera Maintenance IndexAccessing the Camera Start up the web browser on your PCClick the following tabs to display each C D E FViewing Single Camera Capture Image Click to Center ButtonSee Operation Bar Camera ImageSecurity Warning window Security Warning window on Microsoft Windows XP Service Pack Banner Image Auto Centering Click to Center Capturing a Still Image Using Operation Bar Pan/Tilt Operation Pan/Tilt RangeSetting Home Position/Sensor Position/Preset Button Registering Home Position/Sensor PositionRegistering a Preset Button Only an administrator can register preset buttonsViewing the Image Changing or Deleting the Settings Viewing Multi-Camera Capture Image Button SeeWhen the image is not displayed on the Multi-Camera How to save a still image to your PCStill image can be saved using the capture image button see On the Single Camera or Multi-CameraViewing Buffered Image Deleting Buffered Images PlayPrev or Next 10 orViewing Still Images on Your Mobile Phone Stopping E-mail Transfer by the Mobile Phone Operation Using Camera Features Access the camera see Top page is displayedWireless Account Administrator*1Basic Network UPnPPrivacy Mode Enables privacy mode see IndicatorControl Connecting the Camera to Your Network Automatic SetupDhcp Setup Static Setup Setting Description They usually have two addresses Not displayed. in the Installation/Troubleshooting On the image quality or how bright the object is160 x 120 pixels About 3 KB 24 Kbit 320 x 240 pixels About 10 KB 80 KbitUsing Wireless LAN Set each parameter for the Encryption Selecting WEP at Cipher enables you to set WEPKey1One or all of the four keys can be set. Check the same Bottom Operating Instructions Using UPnP Universal Plug and Play If the network setting is Automatic Setup, enable AllowAccess from the Internet on the Network page see InternetSetting Description Confirming the Internet access Setting Date and Time Check the box to enable it Time setting from the NTP server moves forward orCameras time setting from fraudulent NTP server Name by E-mail or FTP transfer uses only 24 h formatChanging Camera Settings Position and preset buttons Home Position *2Maximum Values must be selected as minimum home position maximumSetting Description Specifying Pan/Tilt Range Operating Instructions Users must enter the user name and password Administrator/General Users/Guest Users Items Administrator General Users Guest UsersPassword Number of Users Accessible Pages Access LevelLogging in to the Camera Access from guest users From guest users Creating, Modifying or Deleting General UsersSetting Description Operating Instructions Or Japanese. The selected language is displayed as Initial language on the Top, Single Camera, MultiCamera and Buffered Image pages. If you select Support pages are displayed only in EnglishOperating Instructions Configuring Multiple Cameras Setting Description Buffering or Transferring Images by Timer Option and set the time period Setting Description Camera transfers the image to an FTP server see Mail Camera transfers the image by E-mail seeWhen you set FTP for Transfer Method When you set E-mail for Transfer Method Time in 24h mode is attached on the subject Is inserted after the day when referring to a summer timeCharacter and 0-22 characters for a 2-byte character ZoneOperating Instructions Buffering or Transferring Images by Sensor Option and set the time period Setting Description Quality or what object you view Many E-mails to a mobile phone FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Inserted after the day when referring to a summer time Time in 24h mode is attached on the subject. E.gSubject 20050101093020500 Underlined numbers are Seconds Minute 1st 2nd 3rd 4th 5th 6th Specifying Operation Time About Operation Time Operation TimeChanging Indicator Display Enabling Privacy Mode Privacy ModePrivacy Button Front of the cameraMaintenance Maintenance StatusWireless Status Displays wireless information see DefaultConfirming the Wireless Status Confirming the StatusRestarting the Camera Updating the Camera Firmware Operating Instructions Confirm that the version number on the Top page is updated Creating Configuration File Loading Settings from a Configuration File Resetting the Camera to Factory Default Wireless Help Displays the Wireless Help page see SupportSeeing Help Support HelpSeeing Product Information Seeing Wireless HelpSeeing Support Information Factory Default Reset Button Camera has a Factory Default Reset button on the bottomItems Default Required Default Setting ListBasic Wireless Communication mode Speed Auto Encryption WEP AuthenticationMy Network Places Viewnet Enable Cam.com Date Time SettingCamera Camera Name 50-+50 degreesHome Position Tilt Range MinimumAdministrator Authentication AccountSecurity General RetypeAdvanced Multi Multi-Camera Blank Display IP Address or Host BlankIP address*1 NameImage Resolution Mode Privacy ModeBuffer Status Off Transfer Trigger Active Time of Trigger Always Lens Position WhenPreset Buttons PresetButtons Preset 101Cleaning Cleaning the Main UnitCleaning the Lens Clean the camera after the camera is turned offSetting an IP Address on Your PC Local IP AddressSteps Class Subnet Mask Local IP AddressUsing Setup Program Finding the cameraAutomatic Setup Local or Internet Access or Manual Setup Manual Setup window Setting the Proxy Server Settings on Web Browser Setting Your PCHow to Set the Proxy Server Settings Operating Instructions Operating Instructions Setting the Internet Temporary File Setting on Web Browser Windows XP Start SettingsWindows Setup tab Select Communication Detail Add or RemoveAscii Character Table 111File Size and Number of Buffered Images Other Specifications Items Network Camera Items Specifications113 Wireless Specifications Items OfdmIndex 115System Requirements for your PC ActiveX Controls116 Update Firmware UPnP Web Browser Wireless Wireless Help 117 Copyright