Panasonic BM-ET500 operating instructions Installations and Connections, Side View

INSTALLATIONS AND CONNECTIONS

WARNING

The installation described in these figures should be made by qualified service personnel or trained system installers.

Cautions:

•This system must be installed within the protected promise in accordance with the National Electrical Code (NFPA70), and the local authorities having juris- diction.

•Attach this unit to a flat wall with the supplied mounting bracket. After the installation, secure the unit to prevent dropping.

■Caution on Installation

Secure the unit with the supplied mounting bracket to pre- vent vibration, dropping and injury.

Notes:

•Keep the unit:

•in the temperature between 0 °C and 40 °C {between 32 °F and 104 °F} and the humidity between 30 % and 80 %.

Top View

{17 in.}	Keep this area free		400 mm {16 in.}
430 mm	from obstructions		mm {16 in.}
			400
	400 mm {16 in.}	900 mm {35 in.}
	1 300	mm {51 in.}

•Keep the unit away from:

•direct sunlight or light reflection.

•incandescent or halogen lighting.

•places where shadow appear over the front panel.

•noise. (for example, places near air conditioners or ven- tilators)

•electricity.

•outdoor places.

•vibration. (It may cause invalid recognition or injury.)

•Do not place anything inside the space described in the illustration.

•This unit is for indoor use only.

•This unit must be mounted horizontally on the wall.

•Determine the optimum mounting height. The recom- mendation is between 1.38 m {54 in.} and 1.5 m {60 in.} for enrollment/recognition effectiveness.

•Mount the bracket on the wall. Be sure to provide access for video control and DC power from the control unit.

Side View

						700 mm {28in.}
	{18 in.}			Keep this area free
	mm			from obstructions		in.}
moreor	211					mm700{28
		80 mm {3 in.}
in.}{54mm3801
	(recommended)		400 mm {16 in.}		900 mm {35 in.}
				1 300 mm {51 in.}

Floor

System Instruction (Maximum System)
	Coaxial cable (BNC)
	Camera power cable	BM-ET500
		(For recognition)
Coaxial cable (BNC)
BM-ET500
(For		BM-ET500
enrollment)
		(For recognition)
General-purpose	BM-ED500
power supply *
(24 V DC)
	Camera 1
	Camera 2
Camera 3		Electric lock*
Administration PC*	Wiegand
	or RS-485
		Electric lock*
		Door control box* Access server*
LAN
* The use of the Administration PC was not evaluated by UL.
* The use of electric lock was not evaluated by UL.

*The use of door control box was not evaluated by UL.

*General-purpose power supply must be a UL Listed access control power limited device.

In the case of Wiegand / RS-485 use 11