Panasonic BM-ET500 operating instructions

Page 20

The status indicator does not light up.

The power of the control unit may be

Confirm if the power of the control unit

turned off. (The control unit supply the

is turned on. (Refer to the control unit's

power to the unit.)

operating instructions.)

Third party external power may be off.

 

 

 

This unit may be disconnected from the

Refer to the dealer or service person-

control unit.

nel.

The buzzer does not sound.

The buzzer level may be too low to be heard.

Adjust the buzzer level. (Refer to p.15.)

20

Image 20
Contents Operating Instructions Lightning flash with arrowhead sym Important Safety Instructions Contents Preface As a recognition camera for iris recognitionFeatures Numeric keys to enter the ID-and-passwordAccess control system can be composed Automatic guidance and recognition by two camerasLimitation of Liability Notification about this DocumentTrademarks Document Convention Precautions LED indicator Status Indicator Operation indicatorsUser guidance indicators Buzzer-level adjustment holeInstallations and Connections Side ViewInstallation WallCoaxial cable To Camera 1 3 of the control unit Dimensions of the Mounting Bracket Maintenance Adjustments and MaintenanceAdjustment Recognition Procedures Iris RecognitionID-and-password Authorization When you have mistaken the entry of ID or passwordES500E Additional System ComponentsControl Unit BM-ED500 Troubleshooting Problem Check item RemedyPage Input/Output SpecificationsGeneral Standard Accessories Page Panasonic Digital Communications & Security Company