Charging and recording time
∫Charging/Recording time
≥Temperature: 25 oC (77 oF)/humidity: 60%RH
Charging time | Recording mode | Maximum continuous | Actual recordable | |
recordable time | time | |||
|
| |||
| 1920k1080/60p | 1 h 50 min | 55 min | |
| 1920k1080/30p | 2 h 20 min | 1 h 10 min | |
| 1280k720/60p | 2 h 5 min | 1 h 5 min | |
4 h 30 min | 1280k720/30p | 2 h 35 min | 1 h 20 min | |
640k360/30p | 2 h 45 min | 1 h 25 min | ||
| ||||
| 1920k1080/60fps | 1 h 50 min | 55 min | |
| 1280k720/120fps | 2 h 5 min | 1 h 5 min | |
| 640k360/240fps | 2 h 20 min | 1 h 10 min |
≥These times are approximations.
≥The indicated charging time is for when the battery has been discharged completely. Charging time and recordable time vary depending on the usage conditions such as high/ low temperature.
≥The actual recordable time refers to the recordable time when repeatedly starting/stopping recording, turning this unit on/off, etc.
≥The main unit heats up after use or charging. This is not a malfunction.
≥The power lamp flashes (Flashing with approx. 0.5 second period) when the remaining battery time becomes low.
The remaining battery capacity is displayed on the screen when using Image App (l 17).
≥For information about charging with a mobile USB charger or an AC adaptor, check the support site.
http://panasonic.jp/support/global/cs/e_cam/index.html (This site is English only.)
The power plug is the disconnecting device. Install this unit so that the power plug can be unplugged from the socket outlet immediately.
When the Power lamp is flashing during charging
Flashing with approx. 0.5 second period (off for approx. 0.25 second, on for approx. 0.25 second):
≥Check that the USB terminals of this unit or the connecting device, such as PC are not dirty or covered with a foreign object, and reconnect correctly. If a foreign object or dirt is present, turn off this unit before removing.
≥The environment is at an extremely high or low temperature. Wait until the temperature has returned to an appropriate level and try charging again. If you are still unable to charge, there may be a fault in this unit or the connecting device.
Flashing with approx. 2 second period (off for approx. 1 second, on for approx. 1 second): During charging normally (l 11)
Flashing with approx. 4 second period (off for approx. 2 seconds, on for approx. 2 seconds):
≥When the battery is over discharged or the temperature of the battery is too high or low. It can be charged, but it may take a few hours to complete the charging normally.
≥It will flash in approx. 2 second intervals when normal charging resumes. Even in such cases, it may start flashing in approx. 4 second intervals until charging is completed depending on the conditions of use.
- 12 -