Panasonic HX-A100 owner manual Performing a live broadcast, To stop a live broadcast

Page 40

Performing a live broadcast

Press the Wi-Fi/WPS button continuously to change the Wi-Fi mode lamp to [ ].

≥ Wi-Fi mode lamp [ ] will turn on when the connection is completed. ≥ A live broadcast starts.

≥If [E-mail Setup] is enabled, a broadcast notification e-mail is sent to the addresses that have been set.

∫To stop a live broadcast

Press the Wi-Fi/WPS button, and turn off the Wi-Fi mode lamp.

≥If recording is taking place on this unit during a live broadcast, the live broadcast cannot be stopped. Stop the motion picture recording in advance.

∫About live broadcast images

You can record live broadcast images by pressing the recording start/stop button.

≥The Image App cannot be used connecting with this unit in Live broadcast mode. Access the URL of the live broadcast to check the image.

∫When the Wi-Fi mode lamp [ ] is flashing fast (flashing at an

approximate interval of 0.5 second)

A live broadcast cannot be started.

≥In the following cases, live broadcasting is not available.

j When the recording mode is set to [1920k1080/60p] or [1280k720/60p] j When in [Slow motion mode]

j While recording a motion picture j When in [Interval rec mode]

j When the date setting is out of sync by a day or more

j When two cameras simultaneously perform live broadcasts at the same account (The camera that has started the broadcast first will be disconnected from the broadcast)

≥When settings for live broadcasts are completed and [E-mail Setup] in [Live mode settings] is set, a live broadcast starts and a notification e-mail is sent to all registered e-mail addresses each time the Wi-Fi mode lamp [ ] lights up. When not sending, set to OFF.

≥When you cannot view and listen to a broadcast using the USTREAM application of a television or a smartphone, the password of a distribution program is canceled. Please rebroadcast.

≥If a live broadcast motion picture is saved on the “USTREAM” side, the file name will be the same as the channel name.

≥The live broadcast stops as the elapsed broadcast time exceeds 8 hours 30 minutes, and then it starts again. (A separate file will be saved on the “USTREAM” side.)

- 40 -

Image 40

Contents Wearable Camera Contents Important About the Waterproof/ Dustproof Handling of this unitWhen inner side of the lens is fogged condensation Check before using underwaterWhat to do when inner side of the lens is fogged Slide the side cover downward to open it  BUsing this unit underwater Caring for this unit after using it underwaterRead this first What you can do with this unit Playback on DLNA-compatible devicesLive broadcasting *1 Recording*3 lPower lamp l 12 Access lamp l Wi-Fi/WPS button l 17, 35 Names and Functions of Main PartsMain unit Camera l Lens l 11 Mic Camera/main unit connection cableWearing this unit Fasten to your armAbout the Armband Case Camera unit Main unitHow to attach the adjuster Large Supplied How to remove Camera Unlock Power supply Charging the batteryCharging and recording time When the Power lamp is flashing during chargingCharging/Recording time Recording to a card Cards that you can use with this unitCheck that the access lamp a has gone off About the access lampInserting/removing a microSD card Turning this unit on/off Press the power button to turn on this unitTo turn off this unit Use this unit as a wireless LAN device Wi-FifunctionBefore use Connecting this unit with a smartphone Connecting with a WPS-compatible smartphoneSet the Wi-Fi function to on on the smartphone setup menu Enter password belowStarting Image App Selecting Ssid of this unit to connect with a smartphoneSetting up with Setup wizard Change the Ssid and password for this unitWhen connecting by If the device is Android Tap Tap the wireless access point to connect Enter passwordTap # Camera setup Tap Date & time Setting date and timePreparation Using the Setup Menu Recording motion pictures RecordingRecording still pictures Checks before recording Using the Recording menu Normal shooting modeSlow motion mode Rec ModeInterval rec mode Self TimerLevel Shot Function Image stabilizationWhite balance Backlight CompensColor Night Rec Shooting guidelinesPlayback To copy the data stored in this unit to the smartphoneUsing the Playback menu Playback settingsLumix Club settings SizeCopy from cameraDelete all Camera functionTap # # items in Camera function on the Image App screen Required settings for sending data, etc Required settings for uploading/live broadcastingLumix Club settings Registering Lumix ClubPicture Share settings Data uploading When using the Android device TapRestart the Image App Page Connecting to a WPS-compatible access point Press and hold the Wi-Fi/WPS button for 3 seconds or moreEntering Ssid to connect to an access point Check the Ssid and password of your access pointAbout the connection destination in Live broadcast mode Preparation Connect this unit with the smartphone. l Setting for Live broadcasting Live broadcasting About the Ustream Refer to the Ustream site for detailsSettings on this unit Items ContentsAbout Line quality for Live broadcasting 320k176To stop a live broadcast Performing a live broadcastAbout live broadcast images Image App Connecting this unit and a device on the network When connecting to the smartphonePerform playback operations with the TV remote control Playing back on a DLNA-compatible TVControlling from a DLNA-compatible device Controlling from a smartphoneAbout network information of this unit What you can do with a PC Card reader function mass storageOperating environment To connect this unit to a PCUsing with Windows Using with MacCopying motion/still pictures on PC For use with MacAbout the PC display Using the HD Writer WE 1.0 Windows only Feature of HD Writer WEEditing Online sharingEnd User License Agreement Article 6 IndemnificationOperating environment for HD Writer WE DisplayFree hard disk Drive spaceInstallation ≥ The PC must be rebooted for the application to workInsert the CD-ROM into the PC Click Yes Click NextSelect Start # Control Panel # Uninstall a program Uninstalling HD Writer WEStarting HD Writer WE Initializing the network settings Initializing this unitTroubleshooting Problem Check points Mosaic-like noise Is jagged when viewingMode Files cannot be played Power of this unit doesProblem Check points Access point is not Smartphone Wi-Fi connectionDisplayed in the Wi-Fi Setting screen Smartphone Have forgottenBeeps sound and the Wi-Fi connection disconnects Beeps sound and Wi-Fi mode disconnectsBeep sounds 8 times and cannot connect to the access point Beeps sound 4 timesCleaning When carrying this unit, do not drop or bump itAbout this unit About firmware updates About the batteryAbout personal information About the microSD cardRecording modes/approximate recordable time Recordable time/Number of recordable picturesApproximate number of recordable pictures Requests when disposing of this unit Battery used for this unitThis may cause leaking, overheating, fire or rupture Keep removed screws etc. out of the reach of small childrenHow to remove the battery Regarding the handling of used batteriesCarefully observe copyright Laws About copyrightLicenses Page Panasonic Corporation