Panasonic HX-A100 owner manual Entering Ssid to connect to an access point

Entering SSID to connect to an access point

Enter SSID (Wireless network name) and password of your access point to connect this unit to the access point.

Preparation: Connect this unit with the smartphone. (l 17)

1 Check the SSID and password of your access point.

≥The SSID and password of the access point (e.g. a wireless router) you use are described on the access point device or in its manual. For details, refer to the access point manual.

2 Tap # [Camera Wi-Fi settings] # [Live mode settings] # [Set connect. dest.] on the Image App screen and enter the SSID and password of your access point (Step1).

3 Press the Wi-Fi/WPS button continuously to change the Wi-Fi mode lamp to [ ].

≥ The Wi-Fi mode lamp [ ] flashes. (“1 Beep” sounds 8 times.) ≥ When “2 Beeps” sound 8 times, the connection is completed.

∫About the connection destination in Live broadcast mode

You can register up to three SSIDs for live broadcasting (step 2)

When perfoming a live broadcast, a connection attempt will be made with the first SSID, and if it fails, an attempt will be made with the second one, and so on.

≥From [Live mode settings] # [Set connect. dest.], the following can be set. j Changing the priority order of the SSIDs for live broadcasting

j Deleting connection destinations

≥To disconnect from the access point, press the Wi-Fi/WPS button and turn off the Wi-Fi mode lamp.

- 36 -