Panasonic HX-A100 Beeps sound 4 times, Beeps sound and the Wi-Fi connection disconnects

Page 57

Alert Sound

If this unit is not operating correctly, take note of the alert sound to resolve any problems.

“2 Beeps” sound 4 times

≥If the power is ON, the time of this unit has not been set. Set the date and time. (l 20)

≥If the power lamp flashes quickly and the power turns OFF, the following symptoms are possible.

j The remaining battery level is low. (Charge the battery.) (l 11)

j This unit has become hot. (Turn ON the power after while a short while.)

≥If the access lamp flashes quickly, the microSD card is defective. (Includes limit of card capacity, data errors, etc.)

The status of this unit can be checked by directly connecting to a smartphone, or on the Image App. (The status of this unit will be displayed as a message.)

“3 Beeps” sound and the Wi-Fi connection disconnects

≥The connection environment has become worse. Move this unit closer to the connected device.

“4 Beeps” sound and Wi-Fi mode disconnects

≥Wi-Fi mode disconnects automatically if Wi-Fi mode has not connected for approximately 30 minutes.

“1 Beep” sounds 8 times and live broadcasting does not start

≥Cannot connect to the connection destination for live broadcasting. Check the settings (SSID or password), and communication environment (signal conditions or whether the Wi-Fi mode is correct). (l 35)

“2 Beeps” sound 8 times and live broadcasting does not start

≥This unit cannot log in to “LUMIX CLUB”. Check whether the settings (login ID/password, synchronization of setting details with this unit) are correct and the “LUMIX CLUB” site has some problems. (l 31)

“3 Beeps” sound 8 times and live broadcasting does not start

≥This unit cannot log in to “USTREAM”. Check whether the settings (login ID/password) are correct and the “USTREAM” site has some problems. (l 31)

“4 Beeps” sound 8 times and live broadcasting does not start

≥There is a problem with the “USTREAM” site. Check that multiple live broadcasts are not being performed with the same ID, that there are no problems with the program set for broadcasting, that the data communication speed is sufficient, and that this unit clock is set correctly.

“1 Beep” sounds 8 times and cannot connect to the access point

≥Check the access point settings (SSID or password), and communication environment (whether the signal or Wi-Fi mode are correct).(l 41)

- 57 -

Page 56 Page 58
Image 57
Page 56 Page 58
Contents Wearable Camera Contents Handling of this unit Important About the Waterproof/ DustproofCheck before using underwater When inner side of the lens is fogged condensationWhat to do when inner side of the lens is fogged Slide the side cover downward to open it  BCaring for this unit after using it underwater Using this unit underwaterRead this first Playback on DLNA-compatible devices What you can do with this unitLive broadcasting *1 Recording*3 lNames and Functions of Main Parts Power lamp l 12 Access lamp l Wi-Fi/WPS button l 17, 35Main unit Camera l Lens l 11 Mic Camera/main unit connection cableFasten to your arm Wearing this unitAbout the Armband Case Camera unit Main unitHow to remove Camera How to attach the adjuster Large Supplied Unlock Charging the battery Power supplyWhen the Power lamp is flashing during charging Charging and recording timeCharging/Recording time Cards that you can use with this unit Recording to a cardAbout the access lamp Check that the access lamp a has gone offInserting/removing a microSD card Press the power button to turn on this unit Turning this unit on/offTo turn off this unit Wi-Fifunction Use this unit as a wireless LAN deviceBefore use Connecting with a WPS-compatible smartphone Connecting this unit with a smartphoneEnter password below Set the Wi-Fi function to on on the smartphone setup menuStarting Image App Selecting Ssid of this unit to connect with a smartphoneChange the Ssid and password for this unit Setting up with Setup wizardWhen connecting by If the device is Android Tap Tap the wireless access point to connect Enter passwordSetting date and time Tap # Camera setup Tap Date & timePreparation Using the Setup Menu Recording Recording motion picturesRecording still pictures Checks before recording Normal shooting mode Using the Recording menuSlow motion mode Rec ModeSelf Timer Interval rec modeLevel Shot Function Image stabilizationBacklight Compens White balanceColor Night Rec Shooting guidelinesTo copy the data stored in this unit to the smartphone PlaybackPlayback settings Using the Playback menuLumix Club settings SizeCopy from cameraCamera function Delete allTap # # items in Camera function on the Image App screen Required settings for uploading/live broadcasting Required settings for sending data, etcRegistering Lumix Club Lumix Club settingsPicture Share settings When using the Android device Tap Data uploadingRestart the Image App Page Press and hold the Wi-Fi/WPS button for 3 seconds or more Connecting to a WPS-compatible access pointCheck the Ssid and password of your access point Entering Ssid to connect to an access pointAbout the connection destination in Live broadcast mode Preparation Connect this unit with the smartphone. lLive broadcasting Setting for Live broadcastingAbout the Ustream Refer to the Ustream site for detailsItems Contents Settings on this unit320k176 About Line quality for Live broadcastingPerforming a live broadcast To stop a live broadcastAbout live broadcast images Image App When connecting to the smartphone Connecting this unit and a device on the networkPlaying back on a DLNA-compatible TV Perform playback operations with the TV remote controlControlling from a DLNA-compatible device Controlling from a smartphoneAbout network information of this unit Card reader function mass storage What you can do with a PCOperating environment To connect this unit to a PCUsing with Mac Using with WindowsCopying motion/still pictures on PC For use with MacAbout the PC display Feature of HD Writer WE Using the HD Writer WE 1.0 Windows onlyEditing Online sharingArticle 6 Indemnification End User License AgreementDisplay Operating environment for HD Writer WEFree hard disk Drive space≥ The PC must be rebooted for the application to work InstallationInsert the CD-ROM into the PC Click Yes Click NextUninstalling HD Writer WE Select Start # Control Panel # Uninstall a programStarting HD Writer WE Initializing this unit Initializing the network settingsTroubleshooting Is jagged when viewing Problem Check points Mosaic-like noiseMode Files cannot be played Power of this unit doesSmartphone Wi-Fi connection Problem Check points Access point is notDisplayed in the Wi-Fi Setting screen Smartphone Have forgottenBeeps sound and Wi-Fi mode disconnects Beeps sound and the Wi-Fi connection disconnectsBeep sounds 8 times and cannot connect to the access point Beeps sound 4 timesWhen carrying this unit, do not drop or bump it CleaningAbout this unit About the battery About firmware updatesAbout personal information About the microSD cardRecordable time/Number of recordable pictures Recording modes/approximate recordable timeApproximate number of recordable pictures Battery used for this unit Requests when disposing of this unitThis may cause leaking, overheating, fire or rupture Keep removed screws etc. out of the reach of small childrenRegarding the handling of used batteries How to remove the batteryAbout copyright Carefully observe copyright LawsLicenses Page Panasonic Corporation
Top Page Image Contents