Panasonic NV-GS400GN Using the Menu Screen, Adjusting Brightness and Colour Level

Before Use

2Adjust the LCD Monitor angle according to the desired recording angle.

≥The LCD Monitor can rotate a maximum of 180o 1 from the vertical position upwards and a maximum of 90o 2 to the downward direction. Forcefully rotating the LCD Monitor beyond these ranges will damage the Movie Camera. You cannot rotate the LCD Monitor when it is opened 120o angle. Therefore, do not rotate it forcibly.

1180o 290o

Closing the LCD Monitor

Push the LCD Monitor until it is securely locked. ≥Make sure the Card Slot Cover is closed.

ªAdjusting Brightness and Colour

Level

When [LCD/EVF SET] on the [LCD/EVF] Sub-Menu is set to [YES], the following items are displayed.

LCD/EVF SETUP

1LCD BRIGHTNESS [-]----[+]

LCD COLOUR LEVEL [-]----[+]

EVF BRIGHTNESS [-]----[+]

;/∫:SELECT &/%:SETUP !/MENU:EXIT

LCD Brightness [LCD BRIGHTNESS] Adjusts the brightness of the image on the LCD screen.

LCD Colour Level [LCD COLOUR LEVEL]

Adjusts the colour saturation of the image on the LCD screen.

Brightness of the Viewfinder

[EVF BRIGHTNESS]

Adjusts the brightness of the image in the Viewfinder.

To Adjust

Press the [;/∫] Button and select the item to be adjusted, and then press the [6/5] Button to raise or lower the number of vertical bars in the Bar Indication.

≥A larger number of vertical bars indicates stronger brightness or colour saturation.

To Increase the Brightness of the Entire LCD Monitor

Press the [POWER LCD] Button.

When you press the [POWER LCD] Button, the LCD monitor becomes bright about twice as much as usual.

POWER

LCD

(30)

The Power LCD Lamp (30) lights up.

≥When turning the power on with using AC Adaptor, [POWER LCD] function is automatically effective.

≥When you rotate the LCD Monitor 180oand then close it, it resumes normal brightness.

To Resume Normal Brightness

Press the [POWER LCD] Button again.

To Change the Picture Quality of the LCD Monitor

Set the [LCD AI] on the [LCD/EVF] Sub-Menu to [ON] or [OFF].

[ON]: The screen image becomes clear and vivid. (The effect varies according to the recording scene.)

≥When Power LCD Lamp lights up, [LCD AI] is automatically set to [ON]. You cannot change this setting.

≥These adjustments do not affect the recorded images.

≥For other notes concerning this item, see -65-.

Using the Menu Screen

To facilitate the selection of a desired function or setup, this Movie Camera displays various function setups on Menus.

≥When operating the menu with the Viewfinder, set [LCD/EVF] >> [EVF ON/AUTO] >> [ON] or rotate the LCD monitor by 180o.

1Press the [MENU] Button (16).

	STILL
	ENTER
(16) MENU	FADE

13