Inserting/removing the battery
| |
| |
| |
1Open the card/battery door and insert the battery in the direction shown in the figure.
≥Push the center of the battery in the direction of the # until it “clicks” and locks.
2Close the card/battery door.
∫Removing the battery
Move the battery release lever in the direction indicated by the arrow and remove the battery when unlocked.
≥ Turn off the unit and make sure the LCD monitor is turned off. Then remove the battery while supporting the unit to prevent it from dropping.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
12VQT2Z95