Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 35) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored.
Caution:
Check that the status indicator has gone off.
Status indicator A ≥ When this unit is
accessing the SD card,
| the status indicator |
| |
| lights up. |
1Open the card/battery door and insert (remove) the SD card into (from) the card slot B.
≥Face the label side C in the direction shown in the illustration and press it straight in as far as it will go.
≥Press the center of the SD card and then pull it straight out.
2Securely close the card/battery door.
≥Do not touch the terminals on the back of the SD card.
≥Do not apply strong shocks, bend, or drop the SD card.
≥Electrical noise, static electricity or the failure of this unit or the SD card may damage or erase the data stored on the SD card.
≥When the status indicator is lit, do not: jRemove the SD card
jTurn the unit off
jInsert and remove the USB terminal jExpose the unit to vibrations or shock
Performing the above while the lamp is on may result in damage to data/SD card or this unit.
≥Do not expose the terminals of the SD card to water, dirt or dust.
18VQT2Z95