Before using
The one-touch free-style grip belt
ªTo use as a hand strap
If you use the grip belt as a hand strap, then you can carry or handle this camera more easily.
1Open the lock cover 1 by pinching the projections 2 on both sides. Press the lock button 3 to remove the grip belt.
2
13
≥When removing the grip belt, tightly hold the camera with both hands.
≥After removing the grip belt, restore the lock
cover to the original position.
2Adjust the belt length.
1 2
13
1 Flip the belt.
2 Slide 1 in the direction indicated by the arrow. 3 Fix the belt.
3Put your hand through the strap.
≥Use the free style remote control for more convenience.
≥Hold the movie camera not to cover the microphones or the sensors with your hands.
ªTo restore the strap to the grip belt
≥When returning the grip belt to the grip belt attachment part, press the lock cover 1 and check if the grip belt is securely locked.
1
ªTo use as a grip belt
Adjust the belt length so it fits your hand.
1Adjust the belt length and the pad position.
2
1 3
1Flip the belt.
2Adjust the length.
3 Fix the belt.
Using the LCD monitor
You can record the image while viewing it on the LCD monitor opened.
1Put a finger on the LCD monitor open part and pull the LCD monitor out in the direction of the arrow.
≥The viewfinder will go off.
≥It can open up to 90o.
2Adjust the angle of the LCD monitor as you prefer.
1 180o | 2 90o |
≥It can rotate up to 180o 1 towards the lens or 90o 2 towards the viewfinder.
≥The brightness and colour level of the LCD monitor can be adjusted from the menu.
≥If it is forcibly opened or rotated, the camera may be damaged or fail.
≥Check that the card slot cover is closed. ≥When the LCD monitor is rotated by 180o
towards the lens (when recording yourself), the LCD monitor and the viewfinder will be simultaneously activated.
8
VQT0N57