Before using
3Insert/remove the card into/from the card slot.
1
≥When inserting a card, face the label side 1 towards you and push it straight in with one stroke as far as it goes.
≥When removing the card, press the center of the card and then pull it straight out.
4Securely close the card slot cover.
ªConcerning the card
≥Do not format the card with another
Camcorder or any personal computer. This operation may make the card unusable.
≥Do not touch the terminals on the back of the card.
≥Electrical noise, static electricity, or failure of the Camcorder or the card may damage or erase the data stored on the card. We recommend saving important data on a personal computer by using a USB cable, PC card adaptor, and USB reader/writer.
ªCard access lamp
≥When the Camcorder accesses the card (reading, recording, playback, erasing, etc.), the access lamp lights up.
≥If the following operations are performed when the access lamp is lit, then the card or the recorded data may be damaged or the Camcorder may malfunction.
≥Inserting or removing the card.
≥Operating the [OFF/ON] switch or the mode dial.
≥Attaching and removing the battery.
ªSD Memory Card
≥The memory capacity indicated on the SD Memory Card label corresponds to the total amount of capacity to protect and manage the copyright and the capacity available as conventional memory for a Camcorder, personal computer or other equipment.
ªConcerning the write protection
switch on the SD Memory Card
≥The SD Memory Card has a write protection switch on it. If the switch is moved to [LOCK], you cannot write to the card, erase the data on it, or format it. If it is moved back, you can.
Selecting a mode
Rotate the mode dial to select the desired mode.
1Rotate the mode dial.
≥Set your desired mode to 1.
1
Joystick
: TAPE RECORDING MODE
Use this when you record the image on a tape. (Also, you can simultaneously record still pictures on a card while recording images on a tape.)
: TAPE PLAYBACK MODE
Use this to play back a tape.
: CARD RECORDING MODE
Use this to record still pictures on a card.
: CARD PLAYBACK MODE
Use this to play back the still pictures recorded on a card.
PC : PC CONNECTION MODE
You can view or edit the images recorded on a card on your personal computer.
21
LSQT0974