Panasonic NV-GS300B, PV-GS300 Audio dubbing, Before recording with audio dubbing

Edit mode

Audio dubbing

You can add music or narration to the recorded cassette.

(Audio dubbing can only be performed by using the remote control.)

≥Set to Tape Playback Mode.

1When using an external microphone, securely insert the plug into the [MIC] terminal.

MIC

2Find a scene that you want to add sound to, and press the [;] button on the remote control.

;

3Press the [AUDIO DUB] button on the remote control to make audio dubbing ready.

A.DUB ;

4Press the [;] button on the remote control to start audio dubbing.

A.DUB ¥

≥Be sure that the sound is directed towards either the external microphone or the built-in microphone.

5Press the [;] button on the remote control to stop audio dubbing.

≥If a tape has a non-recorded portion when the tape is dubbed, images and sounds may be disturbed when this portion of the tape is played back.

ªBefore recording with audio dubbing

≥Set to Tape Recording Mode.

≥When you want to preserve the original sound taken during recording, set [ADVANCED] >> [AUDIO REC] >> [12bit] to take pictures. (When set [16bit], the sounds taken during recording are erased after recording with audio dubbing.)

≥Set [BASIC] >> [REC SPEED] >> [SP] to take pictures.

ªTo play back the sound recorded with

audio dubbing

You can switch between the sound recorded with audio dubbing and the original sound.

Set [SETUP] >> [12bit AUDIO] >> [ST2] or [MIX]. [ST1]: It only plays back the original sound. [ST2]: It only plays back the sound added by

audio dubbing.

[MIX]: It simultaneously plays back the original sound and the sound added with audio dubbing.

≥During audio dubbing, it is automatically set to [ST2].

50

LSQT0974