With a PC
≥Although the screens in these Operating Instructions are shown in English for the sake of example, other languages are supported as well.
≥These instructions do not cover the basic operations of the personal computer or define any terms. For this information, refer to the Operating Instructions which accompany your personal computer.
≥Do not disconnect USB connection cable while the status indicator of Camcorder is on. It may freeze the software or destroy the data in transfer.
≥We recommend using the AC adaptor as the power source for the Camcorder when connecting to the personal computer. Data may be lost if the battery power is lost while transferring data.
≥If the Camcorder is used as a Web Camera while virus checking software is running, the Camcorder’s operation may stop midway through. In this case, exit the Messenger, reconnect the Camcorder and restart the
Messenger.
≥Do not delete the folders in Memory Card such as picture folder. Memory card may not be recognized if folders are deleted.
≥When the Camcorder is switched to the PC Connection Mode while it is connected to the personal computer, the operation mode of the Camcorder cannot be switched. In this case, disconnect the USB connection cable. Switch the operation mode of the Camcorder and reconnect the cable.
≥If you install the USB driver while the USB Connecting cable is being connected, or if you do not follow these Operating Instructions, the Camcorder will not be recognized correctly. In this case, delete the driver from
[Device Manager] as described below, uninstall the driver, and
Set the Camcorder to Tape Recording Mode, Tape Playback Mode or PC Connection Mode, connect it to the personal computer, and delete [DVC] or
Depending on your personal computer, one of the following screens may appear.
1Your personal computer does not support USB 2.0 (High Speed) so the video on tape cannot be imported from the Camcorder to the personal computer with the USB cable. Connect to an USB interface port etc.
≥You can use the WEB camera function.
Cancel
2The personal computer has recognized a USB 2.0 (High Speed) driver other than the Microsoft driver. Update the driver to make sure that it operates properly.
3The USB 2.0 (High Speed) driver may not be recognized correctly. Update the driver to make sure that it operates properly.
ªAbout the SD Memory Card
SD Memory Card
The SD Memory is an external Memory Card that is available in larger capacities. It has a write protect switch to prevent data writing and card formatting, as well as a copyright protection function.
≥SD Logo is a trademark.
≥All other company and product names in the operating instructions are trademarks or registered trademarks of their respective corporations.
Files recorded on a SD Memory Card
It may not be possible to play back the files on this Camcorder recorded on and created by other equipment or vice versa. For this reason, check the compatibility of the equipment in advance.
ªAbout the compatibility of the card
files
Data files recorded on an “SD Memory Card” by this Camcorder conform with DCF (Design rule for Camera File system) established by JEITA (Japan Electronics and Information Technology Industries Association).
≥If you attempt to play back files recorded with this Camcorder on other equipment or to play back files recorded with other equipment on this Camcorder, you may not be able to play them back. Please check the compatibility with the other equipment in advance.
61
LSQT0974