Panasonic NV-GS300B, PV-GS300 operating instructions To disconnect USB cable safely, Double click

Page 60

With a PC

To disconnect USB cable safely

If USB cable is disconnected while the computer is on, error dialog box may appear. In such a case click [OK] and close the dialog box. By following the steps below you can disconnect the cable safely.

1 Double click the

icon in task tray.

Hardware disconnect dialog box appears.

2Select [USB Mass Storage Device] and click [Stop].

3Verify [Matshita DVC USB Device] is selected and click [OK].

You can safely disconnect the cable.

Note on the driver name displayed

The driver name displayed will differ depending on your OS, operating environment and the mode of the Camcorder.

Make sure Camcorder’s Card Access Lamp is off and disconnect the cable. Also, the icon will not be displayed when in Tape Recording Mode or Tape Playback Mode.

CAUTION:

If you disconnect the USB cable while the Card Access Lamp is on, it may damage the Card data.

If the above operation is not performed correctly, when data is copied from the personal computer to an SD Memory Card, the copied data may be damaged.

When the following operations are performed, the same results will occur as when the USB cable is incorrectly removed (above). Therefore, it is imperative that the above operation is completed before proceeding.

When SD Memory Card is removed.

When Camcorder power is turned OFF.

OFF

ON

When Mode Dial is turned to change modes.

When using on Macintosh

Drag the [NO_NAME] or [Untitled] disk icon to the [Trash], and then disconnect the USB connection cable.

If you no longer need software or driver (Uninstall)

The screens may vary with the type of OS.

1Select [start] (>> [Settings]) >>

[Control Panel], select the software or the

driver from [Add/Remove Programs] to uninstall.

Uninstalling steps may vary depending on the OS. Please refer to the user manual of your OS.

Notes

Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Intel® and Pentium® are the registered trademarks or trademarks of the Intel Corporation.

Apple, Mac OS, iMovie/iMovie HD, FireWire are either registered trademarks or trademarks of Apple Computer, Inc. in the United States and/ or other countries.

All other names, company names, product names, etc. in these instructions are the trademarks or registered trademarks of their

respective corporations.

Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.

The names of the products you are using may differ from the names given in the text. Depending on the operating environment and other factors, the contents of the screens used in these instructions may not necessarily match what you will see on your screen.

60

LSQT0974

Image 60
Contents Operating Instructions Things You Should Know AC AdaptorThis symbol is only valid in the European Union Important Safety Instructions Precautions Before opening the CD-ROM package, please read the following Article 5 Reverse Engineering, Decompiling or Disassembly Article 8 Termination of LicenseContents Playback mode Edit modeWith a PC MenuCharging the battery Attaching the batteryHow to turn on the power Quick GuideHow to turn off the power Recording on a tapeRecording still pictures onto a card Photoshot Playing back tapeAccessories Parts identification and handlingCamcorder Reset button Reset Card access lampPower LCD button Power LCD Cassette holder Accessory shoe USB terminalOne-touch free-style grip belt To use as a grip beltTo use as a hand strap Power supply Connecting to the AC outletFitting the battery Removing the battery≥Set the OFF/ON switch to OFF when not using the Camcorder Charging time and recordable timeTurning the Camcorder on Setting date and time Recharging the built-in lithium batteryAbout date/time Using the LCD monitor Using the viewfinderAdjusting the field of view Extending the viewfinderTo cancel Quick Start Set Setup Quick Start OFFQuick Start Open the LCD monitor or extend the ViewfinderWhen the cassette holder does not Come out When the cassette holder cannot be HousedInserting/removing a cassette Inserting/removing a cardSelecting a mode Card access lampConcerning the card SD Memory CardHow to use the joystick Tape recording mode AUTO/MANUAL/FOCUS switch is set to AutoTape playback mode Basic joystick operationsHelp mode To exit the Help modeCard recording mode AUTO/MANUAL/FOCUS switch is set to Auto Card playback modeSwitching the language Using the menu screenAbout the menu setting To exit the menu screenAdjusting LCD monitor/viewfinder Operating with remote controlAdjusting the brightness and color Level Order to increase the brightness Entire LCD monitorUsing the remote control Remote controlInstall a button-type battery Remote control usable range Selecting the remote control modeConcerning the button-type battery About auto mode Recording modeCheck before recording Basic Camcorder positioningOn-screen display in the tape recording mode Power Save≥Set to Tape Recording Mode Recording on a tapeRecording check Blank search functionStopping blank search midway Through On-screen display in the card recording mode ≥Set to Card Recording ModeRecording still pictures onto a card Photoshot To record still pictures clearlyZoom in/out function Recording yourself Backlight compensation functionSoft skin mode To cancel the MagicPix functionTo cancel the soft skin mode MagicPix functionsTo cancel the tele macro function To cancel fadingTele macro function Fade in/fade out functionUsing the built-in flash To cancel the wind noise reduction FunctionTo cancel Auto Ground-Directional Standby Wind noise reduction functionSelf-timer recording When the flash is not usedTo stop the timer midway through Red eye reduction functionTo Cancel the Wide/43 Function To cancel the image stabilizer functionWide/43 function Optical image stabilizer functionRecording in various situations Scene mode To cancel the scene mode functionRapidFire Consecutive Photoshot To stop RapidFire Consecutive Photoshot midway throughRecording in natural colors White balance Manual focus adjustment Set the AUTO/MANUAL/FOCUS switch to FocusSet the AUTO/MANUAL/FOCUS switch to Auto or Focus Manual shutter speed/aperture adjustment To restore to automatic adjustmentShutter speed range Iris/gain value rangeTo adjust volume Settings on the audioPlaying back tape Repeat playbackSlow-motion playback/ frame-by-frame playback Variable-speed search functionTo return to normal playback Playback on TV Playing back cardTo display the on-screen information On the TV Move the joystick up to select Icon to start playbackDeleting files recorded on a card To display multiple playback filesAbout the compatibility of still pictures To delete all filesWriting the printing data on a card Dpof setting Formatting a cardProtecting files on a card Edit mode Recording from a tape onto a cardCopying onto a DVD recorder or a VCR Dubbing ≥The image and sound are reproducedUsing the DV Cable for Recording Digital Dubbing To cancel the standby for recordingWhen operating with the remote control Start playback. Player Start recording. RecorderAudio dubbing Before recording with audio dubbingTo play back the sound recorded with Audio dubbing You can add music or narration to the recorded cassetteWhen you stop printing halfway Using the Camcorder with a PC Software InstallationCheck before Use Connecting Computer Camcorder Using Built-in SD DriveOperating environment ≥MotionDV StudioUsing as a Web camera Installing USB DriverSetting up Windows Messenger Usual operation WEB Camera mode Tape Playback Mode≥Windows Messenger is activated Using Quick Movie Magic or MotionDV Studio Setting up MSN MessengerClick Sign Type in your Sign-in name and password Type in your E-mail address and password Installation of Quick Movie Magic MotionDV Studio Hard disk Other requirements Click the Quick Movie Magic/ MotionDV Studio Click NextClick Update Driver To start Quick Movie Magic or MotionDV StudioIf a description other than Microsoft is displayed Using on Macintosh Interface DV FireWireOperating environment on iMovie IMovie HD Copying still pictures on PCIf you no longer need software or driver Uninstall To disconnect USB cable safelyDouble click About the SD Memory Card About the compatibility of the card FilesSD Memory Card Files recorded on a SD Memory CardDcim Menu list Tape Recording MenuTape Playback Menu MenuCard Recording Menu Card Playback MenuBasic DATE/TIME -65-PROTECT Menus related to taking pictures Menus related to playbackOther menus Indications Basic indicationsRecording indications Playback indicationsConfirmatory indications Textual indicationsFunctions cannot be used simultaneously There is no ink. Check the connected printerThere is no paper. Check the connected printer Check the connected printerBefore requesting repair Problems and solutions Original sound was erased when audio dubbing was performed Screen has changed suddenlyCassette cannot be inserted Auto focus function does not workPush the Reset Switch is displayed Using MotionDV Studio 5.6E LE for DV or Quick Movie MagicPlayback picture is not clear Card Recorded pictures are not clearAbout condensation About dirty headsAbout the Camcorder About the battery Be sure to detach the battery after usePrepare spare batteries when going out for recording Do not throw old battery into fireAbout the AC adaptor About the cassetteAbout the card Folder structure of the cardExplanation of terms Periodical check-upsAutomatic white balance LCD monitorWhite balance Auto focusSpecifications Http//panasonic.co.jp/pavc/global/csMode Camcorder Accessory System Accessory# DescriptionCamcorder Accessory Order Form For USA Customers AM-5 PM M-F, 6 AM-1030 AM SAT, Pacific TimeRequest for Service Notice Request for Service Notice USA OnlyLimited Warranty For USA Customers Panasonic/Quasar Video ProductsCustomer Services Directory Accessory PurchasesCentralized Factory Servicenter Npcparts@us.panasonic.comWarranty For Canadian Customers Ambler Drive, Mississauga, Ontario L4W 2T3Camcorder Product One 1 year, parts and labour Index NumericsSpanish Quick Use Guide Guía española para el uso rápido Cómo apagar la alimentación Grabación en una cintaGrabación de imágenes fijas en una Tarjeta Photoshot Reproducción de la cintaF1105Mk0 50 a
Related manuals
Manual 88 pages 19.4 Kb