Before using
Quick Guide
ªCharging the battery
1Connect the AC Cable to the AC adaptor and the AC Jack.
2Put the battery on the battery mount by aligning the mark, and then securely plug it in.
ªAttaching the battery
Push the battery against the battery holder and slide it until it clicks.
ªInserting/removing a cassette
1Slide the [OPEN/EJECT] lever and open the cassette cover.
OPEN/
EJECT
2After the cassette holder is opened, insert/ remove the cassette.
3Push the [PUSH] mark 1 in order to close the cassette holder.
1
PUSH
4Only after the cassette holder is completely housed, close the cassette cover.
ªInserting/removing a card 1 Open the card slot cover.
2Insert/remove the card into/from the card slot.
1
≥When inserting a card, face the label side 1 towards you and push it straight in with one stroke as far as it goes.
≥When removing the card, open the card slot cover and press the center of the card and then pull it straight out.
3Securely close the card slot cover.
ªHow to turn on the power
1While pressing the button 1, set the [OFF/ON] switch to [ON].
1
OFF | ON |
9
LSQT1121