Playback mode
Frame-by-frame playback
≥Set to Tape Playback Mode.
1During playback, move the joystick up to select the [1/;] icon to pause playback.
2Push the [s
/VOLr] lever.
VOL 
Towards [T]: normal direction
Towards [W]: reversed direction
≥If you keep pushing the lever, then the images
will continuously be played back frame by frame.
≥The pause icon appears for an instant. Continuous
ªTo return to normal playback
Move the joystick up to select the [1/;] icon to start playback.
Playback on TV
Images recorded by this Camcorder can be played back on a TV.
≥Insert a recorded tape or card into this
Camcorder.
≥Be sure that the power of the unit is turned off before connecting it to a TV.
1Connect the Camcorder and a TV.
[VIDEO IN]
[AUDIO IN]
A/V
1
≥Connect the Camcorder and a TV by using the AV cable 1.
2Turn on this Camcorder and set the mode dial to the Tape Playback Mode (or Card Playback Mode).
3Select the input channel on the TV.
≥If the images are not played back correctly on the TV (e.g. they are displayed vertically), perform the menu operations in accordance with the aspect ratio of the TV monitor.
Set [SETUP] >> [TV ASPECT] >> [16:9] or [4:3].
4Move the joystick up to select the [1/;] icon to start playback.
≥The image and audio are output on the TV.
5Move the joystick down to select the [∫] icon to stop playback.
≥Use the AC adaptor to free you from worrying about the battery running down.
ªIf the image or audio from this
Camcorder is not output on the TV
≥Check that the plugs are inserted as far as they go.
≥Check the [12bit AUDIO] settings.
≥Check the TV’s input setting (input switch). (For more information, please read the operating instructions for the TV.)
41
LSQT1121