Before Use
5) [LCD/EVF]
LCD/EVF Setup
[LCD/EVF SET]
LCD and Viewfinder Adjustment (p. 19)
[EVF ON/AUTO]
Using the Viewfinder (p. 19)
6) [INITIAL]
Initial Setup
[AV JACK]
AV Jack (pp. 13, 65)
[REMOTE]
Remote Control Mode (p. 15)
Setting Date and Time
Since the internal clock of the Camcorder has a slight imprecision make sure to check the time before recording.
19
13 14 16 17
1 Set [INITIAL] >> [CLOCK SET] >> [YES].
2 Press the [ |
| / |
| ] Button 13 16 to select [YEAR], | |
|
| ||||
[MONTH], [DAY], [HOUR] or [MIN.] and press | |||||
the [ | / | ] | 14 17 to set it to the desired | ||
value. |
|
|
|
|
|
•Year will cycle in the order shown below. 2000, 2001, ..., 2089, 2000, ...
3Press the [MENU] Button 19 to finish setting the date and time.
• The clock operation starts from [00] second.
•If the 
] Indication flashes. In this case, charge the
•The clock uses the
Internal Lithium Battery Recharge
The internal lithium battery sustains the operation of the clock. When the [ 
] Indication flashes, the internal lithium battery is near exhaustion.
1Connect the AC Adaptor to the Camcorder with the power turned off and then connect to the AC jack.
•After charging for 4 hours, the
LP Mode
A desired recording speed can be selected with [REC SPEED] on the [RECORDING]
If LP Mode is selected, the recording time becomes 1.5 times longer than that of SP Mode.
Although the image quality does not decrease with the LP Mode recording,
•The contents that are recorded in LP Mode are not completely compatible with other equipment.
•Audio dubbing is not possible with LP Mode. (p. 44)
Audio Recording Mode
The sound quality of the recorded sound can be selected with [AUDIO REC] on the [RECORDING]
High
23